Laser Camber Adjusting Tool - for VAG - 7089
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Laser Tools Camber Adjusting Tool (7089) is designed for VAG vehicles, providing a direct replacement for OEM T10179. It offers a key benefit in simplifying camber adjustments on a wide range of Audi, Seat, Skoda, and Volkswagen models. A potential caveat is its specific application to VAG group vehicles, requiring verification for other makes. Key features include an offset ring with an 18mm Bi-Hex profile and compatibility with 1/2 Inch Drive tools.
All features
| Model Part Number | 7089 |
|---|---|
| Brand | Laser |
Extended Product Information
FAQs
Which vehicles is this camber adjusting tool compatible with?
This tool is specifically designed for VAG group vehicles, including Audi, Seat, Skoda, and Volkswagen models listed in the product description (e.g., Audi A3 from 2004, VW Golf from 2004).
What is the size of the Bi-Hex profile?
The tool features an 18mm Bi-Hex (12-point) profile.
What drive size is required for this tool?
It requires a 1/2 Inch Drive tool, such as a ratchet or breaker bar.
Is this tool a direct replacement for OEM parts?
Yes, it is equivalent to OEM tool T10179.
Can this tool be used on non-VAG vehicles?
No, this tool is specifically engineered for VAG vehicles and will not be compatible with other makes or models.
How should I maintain the tool?
Clean it with a dry cloth after use and store it in a dry place. Avoid abrasive cleaners.
What is the benefit of the offset ring design?
The offset ring provides better access to the camber adjustment bolts, especially in confined suspension areas.
Troubleshooting
Tool does not fit the adjustment bolt.
Verify that your vehicle is a VAG model within the specified range and that the adjustment bolt is an 18mm Bi-Hex type. This tool is not compatible with other bolt sizes or makes.
Tool slips on the adjustment bolt.
Ensure the 1/2 inch drive tool is securely attached and that the Bi-Hex profile is fully seated on the bolt. Check the bolt head for damage or excessive wear. Clean both the tool and the bolt.
Difficulty accessing the adjustment bolt.
The offset design of this tool is intended to improve access. Ensure you are using it from the most optimal angle. In some cases, other suspension components may still obstruct access, requiring careful maneuvering.
Pros and Cons
Pros
- Precisely designed for VAG vehicles.
- Equivalent to the official OEM tool.
- Offset head aids access in tight spaces.
- Robust 18mm Bi-Hex fitting for secure grip.
- Compatible with common 1/2 inch drive tools.
Cons
- Limited to VAG group vehicles.
- Requires specific 18mm Bi-Hex bolt size.
- Not suitable for non-VAG makes or models.
- Only compatible with 1/2 inch drive tools.
Setup, Compatibility & Care
Setup: This tool requires a standard 1/2 inch drive ratchet or breaker bar for operation. Simply attach the tool to the camber adjustment bolt on the relevant VAG vehicle. Ensure the 18mm Bi-Hex profile fully engages with the bolt head.
Compatibility: Strictly compatible with VAG vehicles and models listed in the product description, which include various Audi (A3, A4, A6, A8, TT), Seat (Alhambra, Altea, Toledo, Ibiza, Cordoba, Ateca), Skoda (Octavia, Superb, Yeti, Citigo), and Volkswagen (Eos, Golf, Jetta, Passat, Polo, Scirocco, Tiguan, Touran) models. Verify the specific vehicle's camber adjustment bolt size and type.
Care: After use, clean the tool with a dry or slightly damp cloth to remove dirt and grease. Store in a dry environment to prevent corrosion. Avoid using abrasive cleaners or solvents. Inspect the Bi-Hex profile for any damage before each use.