Phoenix Contact MTK Knife Disconnect Terminal Block - 2.5mm
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Phoenix Contact MTK Knife Disconnect Terminal block is ideal for professionals in measurement and control applications needing reliable electrical connections. Its key benefit is a compact design with a secure screw connection for wires up to 4mm². A potential consideration is its specific voltage and current rating, requiring users to verify compatibility with their system requirements.
All features
| Model Part Number | 3101016 |
|---|---|
| Brand | Phoenix Contact |
Extended Product Information
FAQs
What is the primary use of a knife disconnect terminal block?
A knife disconnect terminal block is primarily used to safely isolate a circuit or device for maintenance, testing, or troubleshooting without needing to disconnect wires or power down the entire system.
What is the maximum wire size this terminal block can accept?
This terminal block can accept wire cross-sections from 0.2mm² up to 4mm².
Which mounting rails is this terminal block compatible with?
It is compatible with NS 35/7.5, NS 35/15, and NS 32 mounting rails.
What are the voltage and current limits for this terminal block?
The rated voltage is 400V, and the rated current is 16A.
What material is the housing made of, and is it flame retardant?
The housing is made of thermoplastic and meets UL94 V0 flammability standards.
How many connection points does this terminal block have?
This specific model has two connection points.
Can I use this for high-power industrial applications?
It is designed for measurement and control applications with a maximum rating of 16A and 400V. For higher power needs, a different terminal block would be required.
Troubleshooting
Terminal block not securely mounted on rail
Ensure the terminal block is fully engaged with the mounting rail and that the rail is properly installed.
Wire connection is loose
Re-insert the wire and tighten the screw terminal firmly. Ensure the wire is stripped to the correct length and that no stray strands are present.
Knife disconnect is difficult to operate
Check for any foreign objects or debris obstructing the disconnect mechanism. Ensure the terminal block is properly aligned on the mounting rail.
Overheating at connection point
Verify that the wire cross-section is within the specified range (0.2mm² - 4mm²) and that the screw terminal is tightened correctly. Ensure the current does not exceed the 16A rating.
Pros and Cons
Pros
- Provides safe circuit isolation for maintenance.
- Robust construction with flame-retardant housing.
- Compact size conserves valuable control panel space.
- Wide compatibility with standard mounting rails.
- Supports a good range of wire sizes for versatile applications.
Cons
- Limited to 16A current and 400V voltage, not suitable for high-power applications.
- Screw connection may require periodic tightening.
- Specific use case for measurement and control applications.
- Gray color may not fit all aesthetic panel designs.
- Requires appropriate mounting rail for installation.
Setup, Compatibility & Care
Setup:
- Ensure the appropriate mounting rail (NS 35/7.5, NS 35/15, or NS 32) is securely installed in your control cabinet.
- Slide the MTK terminal block onto the mounting rail until it clicks into place.
- Prepare the wire ends according to the required cross-section (0.2mm² to 4mm²).
- Insert the wire into the screw terminal and tighten the screw firmly using an appropriate screwdriver to secure the connection.
- Repeat for the second connection point if applicable.
Compatibility:
- Mounting Rails: Compatible with NS 35/7.5, NS 35/15, and NS 32 mounting rails.
- Wire Size: Supports solid and stranded wires from 0.2mm² to 4mm² (AWG 24 - 12).
- Voltage/Current: Designed for applications not exceeding 400V and 16A.
Care:
- Periodically check the tightness of the screw terminals, especially in environments with vibration.
- Keep the terminal block clean and free from dust or debris. Use a dry cloth for cleaning; avoid solvents or liquids.
- Ensure the disconnect mechanism operates smoothly. If it feels stiff, do not force it; inspect for obstructions.