This guide is for anyone looking to expand their rainwater harvesting capacity by linking two water butts. The Strata Water Butt Connector Pipe Kit provides a straightforward solution to efficiently combine your water storage, helping you reduce water waste. While installation requires some basic drilling, the kit includes all necessary components to get you set up quickly. Crafted in the UK from recycled materials, it's an eco-conscious choice for garden irrigation.
Dual Water Butt Connection: Seamlessly links two water butts, effectively doubling your rainwater storage potential.
Complete Kit: Comes with a flexible hose and all essential fittings, ensuring you have everything needed for installation.
Flexible Installation Options: Designed for versatile setup, allowing connection at either the top (for overflow functionality) or the bottom (for simultaneous filling) of the water butts.
Recycled Materials: Proudly made in the UK from recycled plastics, contributing to environmental sustainability.
Optimal Hose Length: Features an approximately 50cm flexible hose, providing adequate spacing and connection between standard water butts.
Enhanced Water Management: Improves the efficiency of your rainwater harvesting system, making it easier to store and access water for your garden needs.
Doubles rainwater storage capacity easily.
Eco-friendly, made from recycled materials.
Includes all necessary fittings for installation.
Versatile for top or bottom connection.
Simple to install with basic DIY tools.
Requires drilling into water butts for installation.
Fixed hose length (approx. 50cm) limits butt placement.
May require basic DIY skills for drilling.
Doubles rainwater storage capacity easily.
Eco-friendly, made from recycled materials.
Includes all necessary fittings for installation.
Versatile for top or bottom connection.
Simple to install with basic DIY tools.
Requires drilling into water butts for installation.
Fixed hose length (approx. 50cm) limits butt placement.
May require basic DIY skills for drilling.
The Water Butt Connector Pipe significantly enhances your rainwater harvesting system by allowing two water butts to function as a single, larger storage unit. Depending on your installation choice, the kit offers two primary methods of water distribution:
Top Connection (Overflow System): When connected near the top of both butts, the first water butt will fill completely, and then excess water will flow through the connector pipe into the second butt. This is ideal if you prefer one butt to be fully used before drawing from the second.
Bottom Connection (Simultaneous Filling): By connecting the butts near their base, water will equalize and fill both water butts at roughly the same rate, provided they are placed on a level surface. This method maximizes immediate storage and distributes weight more evenly.
This connector kit is particularly useful for:
Larger Gardens: Providing ample water for extensive irrigation needs.
Extended Dry Spells: Ensuring a larger reserve of water during periods of low rainfall.
Reducing Water Bills: Minimizing reliance on mains water for outdoor tasks like watering plants, washing cars, or cleaning tools.
Sustainable Living: Contributing to environmental conservation by maximizing the use of natural resources.
To ensure optimal performance, always place your water butts on a stable, level surface. Regularly check the hose for kinks or blockages, especially if you notice uneven filling or reduced flow.
Position Water Butts: Place your two water butts in their desired final locations, ensuring they are on a stable, level surface and close enough for the 50cm hose to connect them comfortably.
Mark Drilling Points: Decide whether you will connect the butts at the top (for overflow) or the bottom (for simultaneous filling). Mark the drilling points on both water butts at the chosen height. Ensure the marks are level with each other.
Drill Holes: Carefully drill a hole at each marked point. The size of the drill bit should match the diameter of the provided fittings. Use appropriate safety measures when drilling.
Insert Fittings: Push the supplied fittings into the drilled holes from the outside of the water butt. Ensure a snug fit.
Secure Washers/Nuts: From the inside of the water butt, secure the fittings with the provided washers and nuts, tightening them firmly to create a watertight seal.
Connect Flexi-Hose: Attach the flexible hose to the fittings on both water butts. Ensure the connections are secure and leak-free.
Test for Leaks: Fill the water butts with water and inspect all connection points for any leaks. Tighten fittings further if necessary.
This kit is designed to be compatible with most standard water butts. The fittings are universal in design to accommodate common water butt wall thicknesses and connection points. Ensure your water butts have sufficient space on their surface for drilling and fitting installation.
Regular Inspection: Periodically check the hose and connections for wear, kinks, or leaks. Address any issues promptly to maintain efficiency.
Clear Blockages: If you notice reduced flow or one butt not filling, check the hose and fittings for any debris, leaves, or sediment that might cause blockages.
Winter Preparation: In areas prone to freezing temperatures, it's advisable to drain your water butts and the connecting hose during winter to prevent ice expansion from damaging the butts or fittings.