Sealey Fork Terminal - Red - 3.7mm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Sealey Easy-Entry Fork Terminal (RT13) is designed for electricians and DIY enthusiasts needing secure electrical connections. Its key benefit is providing a reliable crimp for wiring projects, though it's specifically suited for the 22-18 AWG cable range. This red terminal features a 3.7mm (4BA) size and comes in a convenient pack of 100.
All features
| Model Part Number | RT13 |
|---|---|
| Brand | Sealey |
Extended Product Information
FAQs
What is the main advantage of the 'Easy-Entry' design?
The Easy-Entry design features a funnel-shaped opening that guides the wire strands into the terminal more easily, reducing the chance of stray strands and ensuring a cleaner, more reliable crimp.
What size wire does the red terminal accommodate?
This red Sealey fork terminal is designed for wire sizes between 22 AWG and 18 AWG.
What size screw or stud does the 3.7mm opening fit?
The 3.7mm opening is equivalent to a 4BA thread size, commonly found on M4 screws or posts.
Do I need a special tool to install these terminals?
Yes, a dedicated crimping tool, preferably a ratcheting type designed for fork terminals, is required to ensure a secure and lasting connection.
Can I use these terminals with wires outside the 22-18 AWG range?
It is not recommended. Using wires outside the specified range can lead to poor connections, potential failure, or damage to the terminal or wire.
How many terminals are included in a pack?
Each pack contains 100 Sealey Easy-Entry Fork Terminals.
Are these terminals suitable for high-vibration environments?
When properly crimped with the correct tool, these terminals provide a secure connection suitable for many applications, including those with moderate vibration. For extreme vibration, additional securing methods may be considered.
Troubleshooting
Terminal does not crimp securely onto the wire.
Ensure you are using the correct wire gauge (22-18 AWG) for this terminal and that your crimping tool is appropriate for fork terminals and set correctly. Verify the wire is fully inserted before crimping.
Wire strands are fraying during insertion.
Ensure the wire is stripped cleanly and to the correct length. The easy-entry design helps minimize this, but careful insertion is still recommended.
Terminal does not fit the screw post.
Confirm that the screw post is indeed 3.7mm (4BA) in diameter, as this terminal is specifically sized for it. Check for any obstructions on the screw post or within the terminal's fork.
Pros and Cons
Pros
- Ensures a robust and secure electrical termination.
- Easy wire insertion speeds up installation.
- Clear color-coding aids in correct application.
- Economical pack size for convenience.
Cons
- Limited to 22-18 AWG wire range.
- Requires appropriate crimping tool for optimal performance.
- Specific 3.7mm (4BA) stud size may not fit all applications.
Setup, Compatibility & Care
Setup:
- Select the appropriate Sealey Easy-Entry Fork Terminal (RT13 - Red).
- Strip the end of your 22-18 AWG wire to the correct length, ensuring no stray strands.
- Insert the stripped wire end fully into the terminal's easy-entry funnel.
- Using a suitable crimping tool (e.g., a ratcheting crimper designed for fork terminals), apply firm and consistent pressure to crimp the terminal onto the wire. Ensure a secure mechanical connection.
- Connect the terminal to a 3.7mm (4BA) stud or screw.
Compatibility:
- Wire Gauge: 22-18 AWG (American Wire Gauge).
- Stud/Screw Size: Designed for 3.7mm (approximately 4BA).
- Tooling: Requires a compatible crimping tool for proper installation.
Care:
- Store terminals in a dry environment to prevent corrosion.
- Ensure the area where terminals are installed is free from excessive moisture or contaminants.