PremiumCord Power Cable - Black - PC-186-ML6
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This VDE-approved Y-shaped power splitter cord is designed for users needing to power two devices from a single European Schuko mains outlet. Its key benefit is doubling outlet availability, saving space and reducing clutter. A potential caveat is the fixed length of the split outputs, which may limit placement flexibility in some setups. The cord features a German Schuko input and two C13 outputs, with durable molded plugs and integrated strain relief for enhanced longevity.
All features
| Colour | Black |
|---|---|
| Model Part Number | PC-186-ML6 |
| Brand | PremiumCord |
Extended Product Information
FAQs
What type of outlet does this splitter use?
This splitter uses a German Schuko (CEE7/4) male plug for the input, which is compatible with standard German power outlets.
What kind of devices can I connect to the C13 outputs?
The C13 outputs are suitable for devices that use standard IEC C13 power cords, such as desktop computers, monitors, printers, and some audio-visual equipment.
Is this cable safe to use in all European countries?
The Schuko plug is standard in Germany and several other European countries. It is not compatible with UK, Swiss, or Italian outlets, for example. Always check the power outlet type before use.
What is the maximum power rating for this splitter?
The cable wires are rated for 10 Amperes (10A).
What does 'VDE approved' mean?
VDE approved indicates that the cable has met rigorous safety and quality standards set by the German Association for Electrical, Electronic & Information Technologies.
What are the lengths of the individual split cables?
The Y splitter junction is approximately 1.55 meters from the main plug, and the two output cables from the junction are each approximately 0.45 meters long.
Troubleshooting
No power to one or both connected devices.
Check that the Schuko plug is securely inserted into the wall outlet. Ensure the C13 connectors are firmly plugged into the devices. Verify that the total power draw of both devices does not exceed the 10A rating of the splitter. Test the outlet with another device to confirm the outlet is functional.
Loose connection at the C13 socket.
Gently ensure the C13 plug from your device is fully seated in the female C13 socket of the splitter. If the connection remains loose, the splitter's socket may be worn or damaged. Consider replacing the splitter if this is a consistent issue.
Cable feels unusually warm.
Immediately disconnect the splitter from the power source. This may indicate an overload. Check the power requirements of connected devices. If devices are within the 10A limit, there might be an internal fault, and the cable should not be used further.
Pros and Cons
Pros
- Expands outlet availability from one to two for C13 devices.
- VDE approval assures safety and compliance with European standards.
- Durable, molded plugs with strain relief for a longer lifespan.
- Suitable for powering common computer peripherals and audio-visual equipment.
- Reduces cable clutter by consolidating connections.
Cons
- Fixed cable lengths for the split outputs may not suit all space requirements.
- Limited to two devices, not suitable for multi-device power strips.
- Only compatible with German Schuko outlets.
- The black color may not blend with all decors.
Setup, Compatibility & Care
Setup: Simply plug the German Schuko (CEE7/4 Male) end into a compatible wall outlet. Then, connect your two devices that require IEC C13 connectors to the two female C13 sockets on the splitter.
Compatibility: This cable is compatible with any standard European Schuko power outlet. The C13 connectors are standard for many computer power supplies, monitors, printers, and other electronic equipment. Ensure your devices do not collectively exceed the 10A rating of the splitter.
Care: To clean the cable, unplug it from the power source and wipe with a dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure the cable is fully dry before plugging it back in. Store the cable neatly to prevent kinks or damage to the wires.