Warren Reed - Designer Plush Pink Quartz Effect Glass Bathroom Splashback
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Warren Reed glass splashback is designed for homeowners looking to add a touch of modern elegance and superior functionality to their bathrooms. Its key benefit is providing a hygienic, grout-free, and easy-to-clean surface that enhances aesthetics. A potential caveat is its specific size (W600mm x H250mm), which may limit placement options. The splashback features moisture and stain resistance, durable toughened glass construction, and a simple, drill-free installation method for a seamless finish.
All features
| Model Part Number | WR01102-P464 |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What material is the splashback made from?
The splashback is made from 6mm toughened safety glass.
Do I need to drill holes to install it?
No, the splashback is designed for a no-drilling installation. Full instructions for easy fitting are included.
How do I clean the splashback?
You can easily clean it using warm, soapy water and a soft cloth. Avoid abrasive cleaners.
What are the dimensions of the splashback?
The dimensions are W600mm x H250mm (Width 600mm x Height 250mm) and it is 6mm thick.
Is this splashback suitable for a wet room environment?
While it is moisture resistant and designed for bathrooms, it is primarily recommended for behind basins. Continuous direct water exposure in a wet room may require specific professional assessment.
What is the guarantee period?
The product comes with a 1-year guarantee.
Can I cut this splashback to a different size?
No, cutting toughened glass requires specialized equipment and knowledge. It is not recommended for DIY cutting and will compromise the integrity of the glass if attempted.
Troubleshooting
Splashback not adhering to the wall
Ensure the wall surface was clean, dry, and free from dust or grease before installation. Check that the correct type and amount of adhesive were used and allow adequate curing time.
Visible smudges or streaks after cleaning
Use a clean microfiber cloth and ensure all soap residue is rinsed off. Wipe dry immediately after cleaning with a separate dry, soft cloth to prevent water spots.
Scratches on the surface
Avoid using abrasive cleaning materials. If minor scratches occur, they may be difficult to remove completely due to the nature of glass. For significant damage, replacement may be necessary.
Pros and Cons
Pros
- Significantly easier to clean than tiled surfaces
- Hygienic due to resistance to mould and stains
- Modern, seamless aesthetic with no visible grout lines
- Quick and simple installation process without drilling
- Durable construction from toughened safety glass
Cons
- Fixed size (W600mm x H250mm) may not suit all spaces
- Requires careful handling during installation due to glass material
- Potential for visible smudges or water spots if not wiped regularly
- Primarily designed for installation behind basins, limiting other uses
Setup, Compatibility & Care Instructions
Setup:
- Ensure the wall surface behind the basin is clean, dry, and flat.
- Follow the included instructions carefully for the recommended adhesive or mounting method. Typically, this involves applying a suitable adhesive (often not included) to the back of the glass or directly to the wall in designated areas.
- Carefully position the splashback against the wall, ensuring it is level and aligned correctly.
- Apply gentle pressure to secure it in place. Allow the adhesive to cure fully according to the manufacturer's recommendations before use.
Compatibility:
- This splashback is designed for installation on flat, stable wall surfaces commonly found in bathrooms.
- It is intended for use behind basins, toilets, or other fixtures where wall protection from water splashes is needed.
- Ensure the dimensions (W600mm x H250mm) are suitable for your intended location.
- Not recommended for use as a countertop surface or in areas of constant direct high heat.
Care:
- Clean regularly using a soft, damp cloth with warm water and mild soap.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can scratch or damage the printed surface or glass.
- Wipe dry with a clean, soft cloth to prevent water spots.