Revell Metallic Brass Email Colour Enamel - 14ml Model Paint
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for model enthusiasts and DIYers looking to achieve a metallic brass finish on their projects using Revell Color enamel paint. The key benefit is the paint's ability to create a durable, attractive finish without damaging plastic model surfaces. A potential caveat is the drying time, which requires patience for optimal results.
All features
| Model Part Number | 32192 |
|---|---|
| Brand | Revell |
Extended Product Information
FAQs
What is the recommended application method?
Revell Metallic Brass paint can be applied with a brush or a spray gun, depending on the project's requirements.
Can I mix this paint with other brands?
It is recommended to use Revell Color Mix for dilution and cleaning to ensure compatibility.
How long should I wait between coats?
You can apply another coat or color after 4-6 hours.
How long does it take for the paint to dry completely?
The paint is completely dry after 24 hours.
What should I use to clean my brushes?
Use Revell Painta Clean to clean your brushes.
Can I use this paint on materials other than plastic models?
Yes, it can be used on many materials, but it's primarily designed for plastic models.
How do I clean my spray gun?
Clean your spray gun with Revell Airbrush Clean immediately after use.
Can I mix all the Revell Color shades?
All shades can be mixed except the signal colours.
Troubleshooting
Paint appears too thick or clumpy.
Dilute the paint with Revell Color Mix. Ensure thorough mixing before application.
Paint is not adhering to the surface.
Ensure the surface is properly cleaned and primed. Lightly sand the surface for better adhesion.
Brush strokes are visible after painting.
Apply thinner coats and allow each coat to dry before applying another. Consider using a spray gun for a smoother finish.
Spray gun is clogging.
Clean the spray gun thoroughly with Revell Airbrush Clean. Ensure the paint is properly thinned.
Pros and Cons
Pros
- Durable synthetic resin enamel paint.
- Safe for plastic models; does not damage the surface.
- Can be mixed with other shades to create custom colors (excluding signal colors).
- Suitable for use with brushes and spray guns.
- Relatively quick drying time for recoating.
- Easy to clean with dedicated Revell cleaning solutions.
Cons
- Requires Revell-specific cleaning solutions for optimal results.
- Drying time is 24 hours for complete dryness.
- Signal colours cannot be mixed.
- May require multiple coats for desired coverage.
- Requires proper ventilation when spraying.
Setup, Compatibility & Care
- Preparation: Ensure the model surface is clean and free of dust or oils.
- Application: Stir the paint well before use. Apply thin, even coats, whether using a brush or a spray gun.
- Dilution: If using a spray gun, dilute with Revell Color Mix according to the manufacturer's instructions.
- Cleaning: Clean brushes with Revell Painta Clean immediately after use. Clean spray guns with Revell Airbrush Clean.
- Storage: Store the paint in a cool, dry place, away from direct sunlight.