Waste tees are used to connect a section of waste pipe into an existing pipe run. The tee is swept to ensure that the new section flows into the main run in the correct direction of flow. In most kitchen and bathroom applications the branch section drops into a main pipe run that is situated below it. The second use for a tee is to create a 90 degree bend with access for cleaning. This is achieved by using an access plug in the part of the swept tee that is at the opposite end to the direction of flow. This fitting is available in 32mm, 40mm and 50mm size options. Our solvent weld waste is manufactured in the UK to BS EN 1455 and is kitemarked. To make a solvent weld joint, first ensure that the outer wall of the pipe and the inner wall of the fitting are both clean and free from grit or swarf. Apply SC250 solvent cement to both surfaces. Push the pipe fully into the fitting and give it a twist to ensure that full contact has been made. Clean off any excess solvent with a damp cloth and leave for 5 minutes to set. The installation should be left for 12 hours before testing. Solvent weld joints are permanent - they cannot be demounted once the joint has been made. When using solvent cement, always work in a well ventilated area and keep the cement away from heat sources or naked flames. Avoid any contact with skin - if contact does occur then wash thoroughly with soap and water. Introducing the FloPlast ABS Solvent Weld 92.5 Degree Cross Tee 40mm White (Product Code: 225430) – a reliable and versatile solution for your plumbing needs. This cross tee is designed to provide a secure and seamless connection in your plumbing system. Key Features: Size: Tailored for 40mm pipes, the ABS Solvent Weld 92.5 Degree Cross Tee (225430) ensures a precise fit in your plumbing configuration. Angle: Featuring a 92.5-degree cross tee, this component facilitates complex plumbing layouts, allowing for efficient direction changes in your system. Material: Crafted from high-quality ABS (Acrylonitrile Butadiene Styrene), this cross tee offers durability and resistance to impact, ensuring long-lasting performance. Color: The white finish adds a clean and professional look to your plumbing system, complementing various design aesthetics. Solvent Weld Connection: Engineered for secure solvent weld connections, providing a reliable and leak-free joint for your plumbing setup. Versatile Application: Suitable for a variety of plumbing installations, this cross tee offers flexibility in adapting your plumbing system to different configurations. Benefits: Precise Fit: Tailored to 40mm pipes, this cross tee ensures a precise and secure fit, contributing to the efficiency of your plumbing system. Efficient Direction Changes: The 92.5-degree angle facilitates complex plumbing layouts, allowing for efficient and smooth direction changes in your system. Durable Construction: Crafted from high-quality ABS, this tee is built to withstand the demands of plumbing applications, ensuring longevity and resistance to impact. Corrosion Resistance: The ABS material is resistant to corrosion, ensuring a clean and unobstructed water flow through your plumbing system.