Frenchic Funky Dora Trim Paint - Green

She is hard to pin down. A natural neutral in quirky khaki, collecting compliments wherever she ma...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Frenchic Funky Dora Trim Paint in Green is designed for DIY enthusiasts and homeowners looking to refresh interior woodwork, furniture, and radiators with a durable, natural neutral finish. Its key benefit is the all-in-one formula, simplifying preparation and finishing by acting as a primer and topcoat. A potential caveat is its specific suitability for interior use only.

All features

ColourGreen
Model Part Number39780694229079
BrandFrenchic

Extended Product Information

FAQs

Do I need to use a primer with this paint?

No, Frenchic Funky Dora Trim Paint is self-priming, meaning it contains properties that allow it to adhere directly to most prepared surfaces without a separate primer.

Is a topcoat necessary after using this paint?

No, this paint is also self-sealing. It provides a durable, scuff-resistant finish on its own, eliminating the need for a separate topcoat.

How much area does a 500ml tin cover?

A 500ml tin will cover up to 7m² with a single coat. For a more durable finish with two coats, expect to cover approximately 3.5m².

Can this paint be used on radiators?

Yes, it is suitable for use on powder-coated radiators. Ensure the radiator is clean and has a compatible surface.

Is this paint safe for children's items?

Yes, it is EN71-3 certified, making it safe for use on children's toys and furniture.

How should I clean painted surfaces?

Clean gently with a damp cloth and a mild detergent. Avoid harsh chemicals or abrasive materials.

Can I use this paint outdoors?

No, this product is specifically designed for interior use only and should not be applied to exterior surfaces.

Troubleshooting

Paint is not adhering well

Ensure the surface was properly cleaned and free from dust, grease, or contaminants. For laminate surfaces, a light degreasing is essential. Consider if any incompatible finishes were present.

Uneven sheen or finish

Ensure the paint is thoroughly stirred before and during application. Apply thin, even coats rather than one thick coat. Maintain consistent brush strokes.

Scuff marks appearing too easily

Allow the paint to cure fully for the recommended 7-14 days before subjecting it to heavy wear. Apply a third coat if needed for extra durability on high-traffic items.

Paint is too thick to apply

Stir the paint thoroughly. If the paint is very cold, allow it to come to room temperature. Thinning is generally not required, but if absolutely necessary, use a very small amount of water.

Pros and Cons

Pros

  • All-in-one primer and topcoat reduces project time.
  • Durable, scuff-resistant finish enhances longevity.
  • Water-based formula with low VOCs and low odour for a better user experience.
  • Versatile application on multiple interior surfaces.
  • Safe for use on children's toys due to EN71-3 certification.
  • Attractive soft-satin sheen in a unique neutral color.

Cons

  • Limited to interior use only.
  • Coverage estimates require careful consideration for two coats.
  • May require more than two coats on certain highly porous or dark surfaces.
  • The soft-satin finish might not be suitable for all aesthetic preferences.
  • Specific long-term performance on powder-coated radiators needs monitoring.

Setup, Compatibility & Care

Setup: Ensure surfaces are clean, dry, and free from grease or old, flaking paint. For best results, stir the paint thoroughly before use. Apply in a well-ventilated area.

Compatibility: This paint is suitable for interior woodwork, trims, skirting, doors, powder-coated radiators, metal, and furniture (including wood and laminate). It is *not* recommended for exterior use or for surfaces exposed to excessive moisture.

Care: For best durability, allow the paint to cure fully for 7-14 days before heavy use. Clean the painted surface with a damp cloth and mild detergent. Avoid abrasive cleaners or excessive scrubbing, as this may damage the finish.