Clear Gorilla Glue 50ml - 20 Pack - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 20-pack of Clear Gorilla Glue is ideal for trade professionals and high-volume repair enthusiasts seeking a strong, waterproof adhesive that dries crystal clear. While it offers exceptional bonding for various materials and a non-foaming application, users should be aware that its fast-acting nature requires prompt work and careful placement.
All features
| Colour | White |
|---|---|
| Brand | Gorilla |
Extended Product Information
FAQs
How long does Clear Gorilla Glue take to dry?
Clear Gorilla Glue sets in approximately 1-2 hours, but full cure can take up to 24 hours for maximum strength. Clamping for the initial setting period is recommended.
Can this glue be used on fabric?
While it can bond some fabrics, it may create a stiff or permanent bond and is not ideal for flexible applications. Test on a scrap piece first.
Is it safe to use on food-contact surfaces?
No, Clear Gorilla Glue is not intended for food-contact applications.
How do I clean up spilled glue?
Wipe up any wet glue immediately with a damp cloth. Once dry, it can be carefully scraped or dissolved with a solvent like acetone (test first).
What is the shelf life of these bottles?
When stored properly in a cool, dry place with the cap tightly sealed, the glue typically has a shelf life of 1-2 years.
Can I paint over dried Clear Gorilla Glue?
Yes, once fully cured, Clear Gorilla Glue can be sanded and painted over.
Is this glue suitable for plumbing repairs?
This glue is waterproof but not designed for pressurized plumbing systems. It's best for general repairs on non-plumbing materials.
Troubleshooting
Glue is not dispensing
Ensure the nozzle is not clogged. Try gently cleaning the tip or poking a fine wire through the nozzle. Check that the cap is securely fastened when not in use to prevent drying.
Bond is weak
Ensure surfaces were clean, dry, and free of dust or grease before application. For very smooth surfaces, consider roughening them slightly. Apply sufficient pressure during clamping and allow adequate curing time.
Excessive foaming or squeeze-out
Apply a thinner layer of glue. Ensure surfaces are held together firmly during curing. Clean up any excess immediately with a damp cloth.
Glue has dried on a surface
For wet glue, wipe away immediately with a damp cloth. For dried glue, attempt to scrape it off carefully or use a solvent like acetone (test on an inconspicuous area first) and then clean with soap and water.
Pros and Cons
Pros
- Dries completely clear for invisible repairs.
- Provides a strong, durable, and waterproof bond.
- Non-foaming formula for clean application.
- Convenient bulk pack for frequent use.
- Bonds a wide range of materials.
Cons
- Fast-acting formula requires quick application.
- Can be difficult to remove if applied incorrectly.
- May require clamping for optimal bond strength.
- Not suitable for all plastics (e.g., polyethylene, polypropylene).
Setup, Compatibility & Care
Setup: Simply open a bottle, apply a thin, even layer to one surface (or both for certain materials), and press the surfaces together. For best results, clamp the item for 1-2 hours, or until the bond is fully set.
Compatibility: This clear adhesive is suitable for wood, metal, stone, ceramic, glass, foam, and most common household materials. It is *not* recommended for use on polyethylene, polypropylene, or PTFE plastics. Always test on an inconspicuous area if unsure.
Care: Store bottles in a cool, dry place away from direct sunlight. Ensure the cap is tightly sealed after each use to prevent the glue from drying out in the nozzle. Clean up any excess wet glue immediately with a damp cloth. Dried glue can be carefully removed mechanically or with a solvent like acetone, but test the solvent on an inconspicuous area first.