Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The AB Tools 2kw Electric Upright Blow Fan Heater is designed for individuals seeking a versatile and efficient heating solution for small to medium-sized spaces in homes or offices. Its primary benefit is providing rapid heating with dual heat settings and a cool fan option, all within a compact and portable design. A key consideration is its suitability for targeted areas rather than large rooms. This heater boasts a 2kW power output, two heat settings (1000W and 2000W), adjustable temperature control, and a fan-only mode for year-round use. Safety features include an automatic thermal switch for overheat protection.
| Model Part Number | BLK161 |
|---|---|
| Brand | AB Tools |
This heater is not designed for use in bathrooms or other high-humidity environments. It should be used in dry indoor locations only.
The heater has two power settings: 1000W and 2000W. The actual power consumption will depend on the setting selected.
It is most effective for heating small to medium-sized rooms, such as bedrooms, studies, or offices. For very large or poorly insulated rooms, its effectiveness may be limited.
Yes, the fan circulates the heated air when the heating element is active. You can also use the fan function independently for cool air circulation.
The heater features an automatic safety thermal switch that turns off the heating element if it overheats or if airflow is blocked. It also has a general overheat thermostat.
No, no assembly is necessary. The heater is ready to use straight out of the box; simply unpack and plug it in.
Ensure the power cord is securely plugged into a functioning wall socket. Check if the mains switch on the heater is in the 'on' position. If the problem persists, try a different power outlet.
The automatic safety thermal switch may have activated due to overheating or restricted airflow. Ensure vents are clear and the heater is not covered. Allow the unit to cool down completely before attempting to restart.
Verify that the heater has been set to one of the heating modes (1000W or 2000W) and not just the fan-only setting. Check that the thermostat is set higher than the current room temperature.
Ensure the heater is placed on a level surface. Check for any obstructions in the fan vents. If the noise persists, contact customer support.
Setup:
Compatibility:
Care:
