Laser Tools Ball Joint Separator - Pneumatic Impact Set - 11 Piece Set - 9183
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 11-piece Laser Tools Ball Joint Separator set (MPN 9183) is designed for professional mechanics and serious DIYers who need to efficiently separate ball joints. Its primary benefit is the time-saving advantage over traditional methods when used with an air impact hammer. A caveat is the requirement for an air impact hammer, which is not included. The set includes a range of common thread sizes for ball joint adaptors, two air hammer punches, an alignment punch, and a domed adaptor, all organized in a durable EVA foam tray.
All features
| Model Part Number | 9183 |
|---|---|
| Brand | Laser |
Extended Product Information
FAQs
What type of air impact hammer is required?
The set is designed to work with standard 1/2" drive air impact hammers. Ensure your hammer has adequate power for the task.
Are the adaptors also usable with a manual hammer?
Yes, the adaptors can be used with a standard mechanic's hammer by striking the rear of the impact hammer shaft where the adaptor is attached.
How do I choose the correct adaptor size?
The adaptors are threaded and designed to fit specific metric ball joint stud thread sizes. Consult your vehicle's service manual or measure the existing ball joint stud thread if unsure.
What is the purpose of the domed adaptor?
The domed adaptor is used for controlled off-line separation, providing a more focused application of force.
Does the set include an air impact hammer?
No, the air impact hammer is not included with this set. It is a separate tool required for pneumatic operation.
What are the dimensions of the storage tray?
The EVA foam tray measures approximately 37mm (height) x 186mm (width) x 197mm (depth).
Can this tool be used on tie rod ends?
This set is specifically designed for ball joints. Tie rod ends typically require different types of separators.
Troubleshooting
Ball joint not separating
Ensure the correct adaptor size is used. Verify the air impact hammer is functioning correctly and delivering sufficient force. Check that the adaptor is seated properly against the ball joint stud. Try applying penetrating oil around the joint and allow it to soak.
Tool slips off ball joint
Confirm the 17mm hex punch is correctly aligned with the impact gun. Ensure the adaptor's jaw is firmly gripping the ball joint housing. The ball joint may be severely damaged or corroded, requiring additional manual preparation.
Air impact hammer not engaging adaptor
Check for proper alignment using the hex punch. Ensure the impact hammer's anvil is securely connected to the adaptor.
Pros and Cons
Pros
- Significantly reduces separation time compared to manual methods.
- Broad range of included ball joint thread sizes ensures compatibility with many vehicles.
- Durable construction suitable for professional workshop use.
- Versatile; can be used with air impact hammers or manual hammers.
- Neatly organized in a custom-fit EVA foam tray.
Cons
- Requires an air impact hammer (not included) for optimal performance.
- May be overkill for very infrequent use by hobbyists.
- Potential for damage to surrounding components if not used carefully.
- Specific thread sizes may not cover every single vehicle model ever produced.
Setup, Compatibility & Care
Setup: To use with an air impact hammer, select the appropriate ball joint thread adaptor for the vehicle's ball joint. Attach the adaptor to the air hammer. Use the 17mm hex punch to align the impact gun's drive shaft with the adaptor. Ensure a secure connection. For manual use, select the adaptor and thread it onto the impact hammer shaft, then use a hammer to strike the rear of the tool.
Compatibility: This set is primarily designed for vehicles with standard ball joint designs that can accommodate the included adaptor thread sizes (M10 to M16 metric threads). It requires an air impact hammer (typically 1/2" drive) or a standard mechanic's hammer.
Care: After use, clean any grease or debris from the adaptors and punches with a clean cloth. Store all components back in their designated slots in the EVA foam tray to prevent loss and damage. Avoid exposing the tools to excessive moisture or corrosive materials. Periodically check the condition of the adaptors for any signs of wear or damage.