Roxil Wood Preserver - 5L
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to protect their outdoor wood from the elements and extend its lifespan. Roxil Wood Preserver provides a robust defense against woodworm, rot, and fungal attacks. While it's easy to apply, remember that multiple coats and sufficient drying time are crucial for optimal protection.
All features
| Brand | Roxil |
|---|
Extended Product Information
FAQs
How long does it take for Roxil Wood Preserver to dry?
Allow at least 48 hours of drying time between coats and before a topcoat application.
Can I apply Roxil Wood Preserver in wet weather?
No, avoid application if rain is forecast within 48 hours.
What tools do I need to apply Roxil Wood Preserver?
You'll need a brush or roller, a container for the preserver, and optionally, gloves and eye protection.
How many coats of Roxil Wood Preserver are needed?
Apply 2-3 coats for effective protection.
Is Roxil Wood Preserver safe for use around plants?
While the formula is water-based, it's best to protect surrounding plants during application.
How much area does a 5L container cover?
Approximately 25m², assuming a coverage rate of 5m² per litre.
Troubleshooting
Preserver not penetrating the wood.
Ensure the wood is clean and dry. Lightly sand the surface if necessary. Apply a thinner coat, allowing more time to penetrate.
Uneven finish after application.
Ensure even coverage with brush or roller. Avoid over-application. Sand lightly between coats if needed.
Pros and Cons
Pros
- Effective protection against woodworm and rot.
- Easy application with brush or roller.
- Water-based formula is odourless and solvent-free.
- Good coverage rate, making it cost-effective.
- Extends the lifespan of outdoor wooden structures and furniture.
Cons
- Requires multiple coats for optimal protection.
- Needs a 48-hour drying period between coats and before topcoat application.
- Coverage can vary based on wood type and condition.
Setup, Compatibility & Care
- Preparation: Ensure the wood surface is clean, dry, and free from loose particles, dirt, or old coatings.
- Application: Apply using a brush or roller, ensuring even coverage.
- Coats: Apply 2-3 coats, allowing at least 48 hours of drying time between each coat and before applying a topcoat.
- Coverage Rate: Apply at a rate of 5m² per litre.
- Compatibility: Suitable for most types of outdoor wood. Always test on a small, inconspicuous area first.
- Care: Avoid applying if rain is forecast within 48 hours of application to allow for proper drying.