VEVOR 10 Ton Hydraulic Knockout Punch Driver Kit - 0.50-2 in. with 6 Dies
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The VEVOR 10 Ton Hydraulic Knockout Punch Driver Kit is designed for electricians and DIY enthusiasts needing to create clean, precise holes in various sheet materials. Its key benefit is the 10-ton hydraulic power for effortless punching, though users should be aware of the hose length limitation. This kit includes a powerful hydraulic punch, a pump with a pressure hose, and six steel dies ranging from 0.50" to 2" for versatile applications. It handles materials like carbon steel, aluminum, stainless steel, and plastic, all organized within a durable carrying case.
All features
| Model Part Number | S10T240CR16MM3UYFV0 |
|---|---|
| Brand | VEVOR |
Extended Product Information
FAQs
What is the maximum thickness of material this tool can punch?
The product description does not specify a maximum material thickness, but performance will depend on the material's hardness and the chosen die size. It is designed for standard sheet metal applications.
How often should I check the hydraulic fluid?
It's recommended to check the hydraulic fluid level periodically, especially before extensive use or if you notice a decrease in performance. Refer to the product manual for specific intervals or indicators.
Can I use this tool on conduit thicker than 2 inches?
No, the largest die included in this kit is 2 inches. For larger holes, you would need a different kit or a specialized tool.
What type of hydraulic fluid should I use?
Consult the product manual for the recommended type of hydraulic fluid. Using the incorrect fluid can damage the system.
Is the hydraulic pump manual or electric?
The pump is manual, operated by a handle that the user pumps to build hydraulic pressure.
How long is the hydraulic hose?
The hydraulic hose measures 29.5 inches (75 cm) in length.
What are the thread stud specifications?
The thread stud specifications are M20X1.5 and M10X1.
Troubleshooting
Punch does not create a full hole.
Ensure sufficient hydraulic pressure has been built up. Check for obstructions or damage to the die or punch. Verify the material thickness does not exceed the tool's capacity.
Hydraulic pump is difficult to operate.
Check the hydraulic fluid level. Ensure the pressure release valve is fully closed before pumping. If the issue persists, the pump may require maintenance or professional servicing.
Hose leaks at connection points.
Ensure all connections are securely tightened. Inspect O-rings or seals for damage and replace if necessary. Use thread sealant if appropriate for the connection type.
Tool is slow to retract.
Ensure the pressure release valve is fully open. Check for internal blockages or low hydraulic fluid.
Pros and Cons
Pros
- Powerful 10-ton hydraulic force for easy operation.
- Includes a comprehensive set of six common die sizes.
- Works with a wide range of metal and plastic materials.
- Comes with a sturdy case for storage and transport.
- Designed for clean and precise hole punching.
Cons
- The hydraulic hose length (29.5 inches) might be restrictive for some setups.
- Requires manual pumping to build pressure.
- Heavier than manual punch tools due to the hydraulic system.
Setup, Compatibility & Care
Setup:
- Ensure the hydraulic pump is filled with appropriate hydraulic fluid (check manual for type).
- Connect the pressure hose securely to both the pump and the punch tool.
- Select the desired die and punch size.
- Assemble the die, punch, and draw stud through the material where the hole is needed.
- Place the punch head onto the draw stud.
- Operate the hydraulic pump handle to build pressure and complete the punch.
- Release pressure using the valve on the pump.
Compatibility:
- Materials: Carbon steel, aluminum, brass, stainless steel, fiberglass, and plastic.
- Hole Sizes: 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2".
- Thread Studs: M20X1.5 & M10X1.
Care:
- After each use, wipe the punch, dies, and pump clean of debris.
- Store all components in the provided toolbox to prevent damage and loss.
- Periodically check hydraulic fluid levels and top up if necessary.
- Inspect the hose for any signs of wear or damage before each use.
- Lubricate moving parts of the punch mechanism as recommended in the product manual.