Garden Furniture Oil - Clear - 1 Litre
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Liberon Garden Furniture Oil is designed for homeowners seeking to nourish, protect, and enhance their exterior wooden furniture. Its key benefit is providing lasting protection against UV damage and the elements, maintaining the wood's natural beauty. A potential caveat is the requirement for thorough surface preparation and multiple coats for optimal results. The oil feeds, seals, and protects wood, containing UV filters to reduce fading and penetrating deeply for long-term defense.
All features
| Model Part Number | GFOCL1L |
|---|---|
| Brand | Liberon |
Extended Product Information
FAQs
What type of wood can I use this oil on?
Liberon Garden Furniture Oil is suitable for all exterior wood types, including teak, oak, pine, and more. It is ideal for garden furniture, decks, and other outdoor wooden structures.
How long does it take for the oil to dry?
Each coat of oil requires a minimum of 24 hours to dry before the next coat can be applied. The furniture should also be left to dry for at least 24 hours after the final coat before use.
What is the coverage rate of this product?
The coverage is approximately 30m² per litre per coat. This can vary depending on the porosity and condition of the wood.
Do I need to remove old finishes before applying this oil?
Yes, the surface must be clean, dry, and free from varnish or other finishes. If an old finish is present, it must be removed before application.
How often should I reapply the oil?
It is recommended to reapply the oil periodically, typically annually, or whenever the wood begins to look dry or faded. Regular maintenance ensures continued protection.
Can this oil be used indoors?
This product is specifically formulated for exterior use. For interior wood, please refer to Liberon's range of interior wood oils and finishes.
What should I do if the wood feels tacky after application?
A tacky finish usually means excess oil was not removed. Ensure you wipe off all surplus oil with a clean, lint-free cloth after the recommended 20-minute penetration time. If it's already tacky, you might need to lightly sand and reapply, wiping more thoroughly.
Troubleshooting
Wood appears streaky or uneven after application
This can happen if excess oil was not wiped off completely. Ensure all excess oil is wiped away thoroughly during the application process. If already applied, you may need to lightly sand the affected area and reapply, ensuring proper wiping.
Oil is not penetrating the wood
Check that the wood surface is clean and dry. Existing sealants or heavily weathered wood might resist initial penetration. Ensure the product is shaken well and applied liberally. For very dry wood, a second coat after 24 hours might be necessary.
Wood turns black after oiling
This usually indicates that the wood was not properly cleaned of mould or grime before application. Use Liberon Garden Furniture Cleaner to treat the affected area and remove the blackening, then reapply the oil after thorough drying.
The finish feels sticky after drying
This is typically due to not wiping off the excess oil after the penetration period. Wipe the surface again with a clean, lint-free cloth. If the stickiness persists, you may need to lightly sand the area and reapply, being careful to wipe off all excess.
Pros and Cons
Pros
- Provides excellent UV protection to prevent fading.
- Deeply penetrates wood for long-lasting defense.
- Enhances the natural beauty and color of wood.
- Suitable for regular maintenance of garden furniture.
- Helps to nourish and seal the wood.
Cons
- Requires thorough surface preparation before application.
- Multiple coats are recommended for best results, increasing application time.
- Drying time between coats is 24 hours.
- Not suitable for surfaces already treated with varnish or other finishes without proper preparation.
Setup, Compatibility & Care Instructions
Preparation
- Clean Surface: Ensure the wooden surface is clean, dry, and completely free from any existing varnish or finishes. If the wood is dirty or has surface mould, use Liberon Garden Furniture Cleaner to remove grime. This step is crucial, as residual dirt or mould can cause the wood to blacken when oiled.
Application
- Shake Well: Always shake the can thoroughly before use.
- Apply Oil: Apply the oil generously using a clean, lint-free cotton cloth or a brush.
- Penetration: Allow the oil to penetrate the wood for up to 20 minutes. This allows the oil to soak into the wood fibers.
- Wipe Dry: After the penetration period, wipe off any excess oil from the surface with a clean, lint-free cloth. This prevents a sticky finish.
- Drying: Allow each coat to dry completely for a minimum of 24 hours before applying subsequent coats. Liberon recommends a minimum of 3 coats, with more coats needed for areas that are particularly exposed to the weather.
- Final Drying: Ensure the furniture is fully dry (at least 24 hours after the final coat) before putting it back into use.
Compatibility
This product is suitable for all exterior wood types. It is not recommended for use over existing varnish or sealants without proper removal and preparation.
Care
Regular cleaning with a damp cloth is sufficient. For deeper cleaning, use a mild detergent. Reapplication of the oil as needed, typically annually or when the wood appears dry, will maintain protection.