Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The Rittal SK 3105.370 enclosure heater is designed for industrial applications to prevent condensation and maintain optimal internal temperatures within enclosures, thereby safeguarding electrical components from corrosion and short circuits. It is ideal for use in environments where temperature fluctuations or high humidity are a concern, offering a reliable heating solution. A potential caveat is its fixed voltage range, requiring careful verification for specific power systems.
| Model Part Number | 3105370 |
|---|---|
| Brand | Rittal |
Its primary function is to heat the inside of electrical enclosures to prevent condensation and maintain a temperature above the dew point, thus protecting components from moisture damage and corrosion.
It supports AC operating voltages from 110 to 240V at 50/60 Hz and DC operating voltage of 110V.
The heater is designed for internal mounting within an enclosure, typically using DIN rail or direct mounting methods. Specific mounting hardware may vary and should be secured according to standard industrial practices.
The product description indicates an 'Other' degree of protection (IP), suggesting it's designed for internal enclosure use where protection is provided by the enclosure itself. Specific IP rating should be confirmed with Rittal documentation.
It is suitable for most standard industrial enclosures where its compact dimensions can be accommodated. Ensure sufficient clearance for heat dissipation and electrical connections.
The product description does not specify an integrated thermostat. For temperature control, it is typically used in conjunction with an external thermostat or connected directly to power, relying on the enclosure's thermal mass and ambient conditions.
The dimensions are 90mm in width, 75mm in depth, and 180mm in height.
Verify that the enclosure is connected to a live power source within the specified voltage range (110-240V AC or 110V DC). Check all electrical connections for security and proper wiring.
Ensure the heater is correctly sized for the enclosure volume and the ambient conditions. Check if the heater is receiving power and if the thermostat (if applicable and separate) is set correctly. Confirm that the enclosure itself is properly sealed.
Ensure the heater is not undersized for the enclosure or that the ambient temperature is not excessively high. Verify that there is adequate airflow around the heater and within the enclosure as per installation guidelines.
Setup:
Compatibility:
Care:
