Bathroom Wall Panel - 1000mm x 2400mm x 10mm Matt Beige Stone

Neptune's mega panel range offers single large panels with a length of 2.4 metres and a width of 1...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Guardian Neptune Bathroom Wall Panel in Matt Beige Stone is an ideal solution for homeowners and renovators looking for a durable, grout-free alternative to traditional tiles. Measuring 1000mm by 2400mm, these panels provide a seamless, waterproof finish that covers 2.4 square metres per sheet, making them perfect for wet areas. While they offer exceptional moisture resistance and ease of maintenance, they require precise cutting and the correct trim profiles to ensure a completely watertight seal during installation.

All features

Model Part Number4010040105
BrandGuardian

Extended Product Information

FAQs

Can I install these panels over existing tiles?

Yes, as long as the existing tiles are stable, clean, and level, you can install the panels directly over them.

Do I need a professional to install these?

While DIY-friendly for those with basic carpentry skills, professional installation is recommended to ensure proper waterproofing and a perfect finish.

What is the best way to clean these panels?

Use a soft cloth dampened with warm water and a mild, non-abrasive household cleaner. Avoid scouring pads.

Are the panels fire-resistant?

The panels are manufactured to be safe and non-toxic, but they should not be placed in direct contact with open flames or intense heat sources.

What happens if a panel gets scratched?

Minor surface scratches may be buffed out carefully, but deep gouges may require the panel to be replaced if the aesthetic is compromised.

Troubleshooting

Panel does not sit flush against the wall

Check the wall for irregularities and ensure the old surface was properly leveled before applying adhesive.

Visible gaps between panel joints

Ensure that the panels are correctly aligned with the compatible joining trims and that the edges were cut square.

Pros and Cons

Pros

  • Significantly faster installation than ceramic tiling
  • Completely waterproof and hygienic
  • No grout lines to scrub or maintain
  • Can be mounted over existing wall surfaces
  • Environmentally safe materials

Cons

  • Requires professional-grade tools for clean cuts
  • Not suitable for curved wall sections
  • Requires specific compatible trims for a finished look
  • Size can make single-person handling difficult in tight spaces

Setup, Compatibility & Care

Installation of the Guardian Neptune panel is straightforward but requires attention to detail.

  1. Preparation: Ensure walls are flat, dry, and free of dust or debris.
  2. Measurement: Measure the area precisely. Panels can be cut to size using a fine-tooth saw.
  3. Trims: Use appropriate starter, corner, and ceiling cove trims to seal all edges properly.
  4. Adhesive: Apply a high-quality, moisture-resistant panel adhesive as recommended by the manufacturer.

For ongoing care, avoid using abrasive sponges or harsh chemical cleaners, as these can damage the matte finish. A soft cloth with a mild, non-abrasive household cleaner is sufficient to keep the surface looking brand new.