Silverhook Big Boy Metal Filler - 250ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Silverhook Big Boy Metal Filler, a two-component putty, to repair metal surfaces. The key benefit is its ability to withstand vibrations and temperature changes, offering a durable solution for both interior and exterior applications. A potential caveat is the need for proper surface preparation for optimal adhesion.
All features
| Model Part Number | BIG21 |
|---|---|
| Brand | Silverhook |
Extended Product Information
FAQs
What surfaces can I use Silverhook Big Boy Metal Filler on?
It is suitable for use on steel, aluminum, zinc, and wood.
How long does it take for the filler to dry?
Drying time varies depending on the ambient temperature and humidity. Refer to the product instructions for specific drying times.
Can I use this filler on my car?
Yes, it is ideal for repairing dents and imperfections on car body panels.
Is the filler waterproof?
The filler is corrosion-resistant, making it suitable for exterior use and exposure to moisture. However, for complete waterproofing, apply a topcoat of paint.
How should I store the product?
Store in a cool, dry place and ensure the lid is tightly sealed.
Can I paint over the filler?
Yes, once the filler is fully dry and sanded, it can be primed and painted.
What is the shelf life of the product?
The shelf life depends on storage conditions. Refer to the product packaging for the expiration date.
Troubleshooting
Filler is not adhering properly.
Ensure the surface is properly cleaned, degreased, and sanded before application. If necessary, use a metal primer.
Filler is too hard to sand.
Ensure the filler is fully cured before sanding. Use finer grit sandpaper to achieve a smoother finish.
Filler cracks after application.
Apply the filler in thin layers, allowing each layer to dry before applying the next. Avoid applying too much filler at once.
Pros and Cons
Pros
- Durable and long-lasting repairs.
- Suitable for a wide range of metals.
- Easy to sand and achieve a smooth finish.
- Offers excellent thermal conductivity.
- Corrosion-resistant for exterior applications.
Cons
- Requires proper surface preparation for optimal results.
- Mixing two components is required.
- May require multiple applications for deep repairs.
Setup, Compatibility & Care
- Preparation: Clean the surface thoroughly. Remove any rust, old paint, grease, or debris. Sand the area for better adhesion.
- Mixing: Mix the two components in the correct ratio as per the product instructions until a uniform color is achieved.
- Application: Apply the filler with a spreader or spatula, pressing firmly into the damaged area. Build up in layers if necessary.
- Drying: Allow the filler to dry completely according to the manufacturer's instructions. This may take several hours.
- Sanding: Once dry, sand the filler smooth using progressively finer sandpaper until the desired finish is achieved.
- Painting: Prime and paint the repaired surface as needed.
Compatibility: Compatible with steel, aluminum, and zinc. Can also be used on wood.
Care: Store in a cool, dry place. Ensure the lid is tightly closed after use to prevent drying.