US PRO Tools Manual Brake Fluid Bleeding and Refill System 3L - 6246
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This manual brake fluid bleeding and refill system from US PRO Tools is designed for automotive professionals and DIY enthusiasts who need to efficiently bleed, flush, and replace brake fluid in vehicle braking systems. Its hand-operated pump builds pressure within the system, while a control valve precisely manages fluid flow, simplifying a often complex maintenance task. A potential caveat is the need for manual operation, requiring sustained effort for larger systems.
All features
| Model Part Number | 6246 |
|---|---|
| Brand | us pro |
Extended Product Information
FAQs
Can I use this system with ABS brakes?
Yes, this system is designed for standard hydraulic brake systems, which include those found in vehicles with ABS. However, always follow the specific service manual procedures for your vehicle's ABS system.
What type of brake fluid is compatible?
This system is compatible with all common types of automotive hydraulic brake fluids, including DOT 3, DOT 4, and DOT 5.1. Always use the fluid type recommended by your vehicle manufacturer.
How much fluid can the reservoir hold?
The system has a total fluid capacity of 3 liters.
Is this system suitable for a single person to use?
Yes, the manual pump allows for pressure to be built and maintained, enabling a single person to effectively bleed and refill the brake system.
What maintenance is required for the tool?
After each use, it is crucial to clean the system thoroughly with a suitable solvent to remove residual brake fluid and prevent damage to seals and hoses. Inspect components regularly for wear.
Do I need any special tools in addition to this system?
You will need the appropriate wrench to open and close the vehicle's bleed screws, and potentially different adapters depending on your vehicle model. Ensure your vehicle's brake fluid reservoir is accessible.
Troubleshooting
System not building pressure
Ensure the hand pump is fully engaged and seals are intact. Check that the control valve is in the closed position before pumping. Verify all connections are secure and leak-free.
Fluid is leaking from the bleed screw connection
Ensure the correct adapter is being used for the vehicle's bleed screw. Try a different adapter if available, or ensure the existing adapter is seated properly and tightened securely without overtightening.
Air bubbles are still present in the lines after bleeding
Re-establish pressure and open the bleed screw again, ensuring the control valve allows steady fluid flow. Check for any potential air ingress points in the hose connections or adapter.
Difficulty in flushing old fluid
Verify the control valve is regulating flow correctly and the bleed screw is sufficiently open. Ensure the vehicle's brake fluid reservoir is not overfilled, which could impede flow.
Pros and Cons
Pros
- Enables efficient single-person brake bleeding and fluid replacement.
- Precise control over fluid flow prevents air contamination.
- Large 3L capacity minimizes interruptions during the process.
- Durable construction ensures longevity in demanding environments.
- Simplifies a potentially messy and difficult maintenance task.
Cons
- Requires manual effort to build and maintain system pressure.
- Effectiveness depends on user's familiarity with brake bleeding procedures.
- Not suitable for systems requiring high-pressure power bleeding.
- Adapters may need to be purchased separately for certain specialized vehicles.
Setup, Compatibility & Care
Setup:
- Ensure the brake fluid reservoir in the vehicle is filled to the appropriate level.
- Connect the appropriate adapter from the system to the vehicle's brake caliper bleed screw.
- Connect the main hose from the US PRO system to the adapter.
- Use the hand pump to build moderate pressure in the system.
- Open the vehicle's bleed screw slightly.
- Use the control valve to regulate the flow of old fluid into the system's reservoir.
- Monitor fluid levels and pressure, closing the bleed screw before releasing pressure.
Compatibility:
This system is designed for use with standard automotive hydraulic brake systems. While it includes universal adapters, specific vehicle models may require specialized bleed screw adapters for a secure and leak-free connection. Always consult your vehicle's service manual for specific brake fluid types and procedures.
Care:
After each use, thoroughly clean the system with a brake cleaner or appropriate solvent to remove residual brake fluid, which can degrade rubber components over time. Store the unit in a clean, dry place. Inspect hoses and seals regularly for wear or damage.