Clutch Kit - Quinton Hazell - QKT4849AF
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Quinton Hazell QKT4849AF clutch kit is designed for MAZDA 6 owners (GG, GY, GH models with 1.8, 2.0, and 2.3 engines, 2002-2013) seeking a reliable replacement for their manual transmission. It offers a complete 3-piece solution including a cover, plate, and release bearing, ensuring a synchronized engagement. A key benefit is its direct compatibility with specific Mazda 6 engine variants, potentially simplifying installation. However, it's crucial to verify the exact engine size and manufacturing year before purchase to ensure correct fitment, as it is not a universal part.
All features
| Model Part Number | QKT4849AF |
|---|---|
| Brand | Quinton Hazell |
Extended Product Information
FAQs
What vehicles is the Quinton Hazell QKT4849AF clutch kit compatible with?
This kit is specifically designed for MAZDA 6 models (GG, GY, GH chassis) with 1.8L, 2.0L, and 2.3L engines manufactured between 2002 and 2013, fitted with a manual transmission.
What components are included in this 3-piece clutch kit?
The kit includes a clutch cover, a clutch plate (with a 225 mm outer diameter and 22 teeth), and a release bearing.
Do I need to buy any other parts to complete the clutch replacement?
While this kit contains the main clutch components, you may also need a new flywheel or pilot bearing depending on their condition. It is advisable to inspect these parts during replacement.
Can I install this clutch kit myself?
Clutch replacement is a complex and labor-intensive job that requires specialized tools and mechanical knowledge. Professional installation by a qualified mechanic is strongly recommended.
What does the 225 mm measurement refer to?
The 225 mm measurement refers to the outer diameter of the friction lining on the clutch plate. This dimension is critical for ensuring proper fitment and engagement.
Are there alternative part numbers for this clutch kit?
Yes, this kit cross-references with several other manufacturers, including BORG & BECK (HK2456, HK2617), National (CK10104), RYMEC (JT1821), SACHS (3000950731, 3000954042), and Schaeffler LuK (623342000, 623352800).
Troubleshooting
Clutch pedal feels soft or spongy.
Check the hydraulic clutch system for leaks in the master cylinder, slave cylinder, or lines. Bleed the clutch system to remove air.
Difficulty shifting gears or gears grinding.
Ensure the clutch is fully disengaging. This could indicate an issue with the release bearing, pressure plate, or hydraulic system. Verify correct installation.
Clutch slipping (engine revs increase, but speed does not).
The clutch plate may be worn or contaminated with oil/grease. Verify proper installation and ensure no oil leaks are present from the engine or transmission.
Noise when clutch pedal is pressed.
This often points to a faulty release bearing. Ensure the release bearing was correctly installed and is the proper component for the kit.
Pros and Cons
Pros
- Provides a complete set of necessary clutch components in one package.
- Tailored fitment for specific MAZDA 6 engine and year ranges, potentially reducing installation errors.
- Includes a release bearing, simplifying the replacement process.
- Offers cross-reference numbers for easier part identification and comparison.
- Designed for manual transmissions, ensuring proper performance for the intended application.
Cons
- Not a universal fit; requires precise matching to vehicle's engine and year.
- Installation is complex and typically requires professional mechanical expertise.
- Does not include additional components like a pilot bearing or flywheel (if needed).
- Limited to specific engine sizes (1.8, 2.0, 2.3L) within the MAZDA 6 range.
Setup, Compatibility & Care
Compatibility Verification:
Before purchasing, verify that your vehicle is a MAZDA 6 (model codes GG, GY, GH) manufactured between 2002 and 2013, and is equipped with either a 1.8L, 2.0L, or 2.3L engine. Ensure your transmission is a manual type. Cross-reference the part number `QKT4849AF` with your vehicle's original specifications or consult a parts specialist.
Installation:
Clutch replacement is a complex mechanical procedure. It requires the vehicle to be safely lifted, the transmission to be removed, and specialized tools. It is highly recommended that installation be performed by a qualified mechanic.
Care:
Once installed, proper clutch care involves avoiding excessive slipping, especially when starting from a standstill or on inclines. Avoid 'riding' the clutch pedal (resting your foot on it while driving), as this can prematurely wear the release bearing and friction plate. Regular maintenance checks of the clutch fluid level (if applicable to the vehicle's hydraulic system) are also advised.