Ocean and Earth Surfboard Repair Resin - PU
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Ocean & Earth PU Surfboard Repair Resin is designed for surfers with Polyurethane (PU) surfboards who need a quick and effective solution for minor dings and damage. Its key benefit is a fast, sunlight-cured repair that strengthens the board and prevents further damage, ensuring optimal performance and longevity. A potential caveat is its suitability primarily for minor damages and its reliance on sunlight for curing. This kit includes fiberglass-impregnated resin, sandpaper, and an applicator, featuring an eco-friendly, styrene-free, and VOC-free formula.
All features
| Brand | Ocean and Earth |
|---|
Extended Product Information
FAQs
What type of surfboards is this resin for?
This resin is specifically designed for PU (Polyurethane) surfboards. It is not compatible with EPS (Expanded Polystyrene) boards.
How long does it take to cure?
Curing time varies depending on the intensity of direct sunlight. In bright, direct sun, it can cure in minutes to a few hours. Cloudy conditions will take longer.
Can I use this for large cracks or major damage?
This resin is best suited for minor dings, chips, and small cracks. For larger or structural damage, professional repair or a more robust repair system may be necessary.
How do I clean up the resin?
Uncured resin and tools can be cleaned easily with soap and water.
Does this kit include everything I need for a repair?
Yes, the kit includes a 28g (1oz) tube of fiberglass-impregnated resin, sandpaper for preparation, and an applicator.
Is the resin safe to transport on an airplane?
Yes, the formulation is airline safe.
What does 'endless shelf life' mean?
It means the resin will not expire or degrade over time under normal storage conditions, making it ready for use whenever you need it.
Troubleshooting
Resin not curing in sunlight.
Ensure the surfboard is in direct, strong sunlight. Insufficient light or cloudy conditions will significantly slow down the curing process. Check that the solar film is applied correctly and that no ambient light is reaching the resin from the sides.
Resin is too thick or difficult to apply.
This is a characteristic of the fiber-filled resin, designed for strength. Apply firm, steady pressure to the tube. Ensure the applicator tip is clear if using it.
Resin has cured in the tube.
While the formula has an 'endless' shelf life, extreme heat or prolonged exposure to light during storage could theoretically cause issues. Ensure the cap is sealed tightly and stored in a cool, dark place.
Resin feels sticky or remains tacky after curing.
This can happen if the resin was not exposed to sufficient UV light or if the application was too thin. Try applying a second thin coat, ensuring full sunlight exposure.
Pros and Cons
Pros
- Environmentally conscious formula without harmful styrene or VOCs.
- Rapid curing time when exposed to sunlight.
- Enhanced strength due to fiber filling.
- Long-term usability with an indefinite shelf life.
- Simple and convenient cleanup with soap and water.
- Safe for travel, including air transport.
Cons
- Best suited for minor dings and superficial damage.
- Requires direct sunlight for effective and fast curing.
- May not be suitable for extensive or structural repairs.
- Specific to PU (Polyurethane) surfboards; not for EPS (Expanded Polystyrene) boards.
Setup, Compatibility & Care
Compatibility: This resin is specifically formulated for PU (Polyurethane) surfboards. It is not recommended for use on EPS (Expanded Polystyrene) foam cores, as it can react negatively with the foam.
Setup:
- Clean the Damaged Area: Ensure the ding or crack is clean and dry. Remove any loose material.
- Sand Lightly: Use the included sandpaper to lightly scuff the edges of the damaged area. This helps the resin adhere better.
- Apply Resin: Squeeze the appropriate amount of resin directly into the ding or crack. Use the applicator if needed for precise placement.
- Apply Solar Film: Cover the wet resin with the provided solar film. This prevents it from curing prematurely due to ambient light and directs sunlight for faster curing.
- Expose to Sunlight: Place the surfboard in direct sunlight. The resin will begin to cure rapidly. Avoid moving the board during the initial curing process.
- Remove Film: Once cured, carefully peel off the solar film.
Care:
- Store the resin tube in a cool, dry place away from direct sunlight. Although it has an endless shelf life, optimal storage conditions are recommended.
- Clean any tools or excess uncured resin immediately after use with soap and water.