From The Anvil Moore Edge Pull - 50mm, Aged Bronze
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners and interior designers seeking a modern, minimalist hardware solution for cabinets and drawers. The From The Anvil Moore Edge Pull offers a sleek, integrated look with its concealed fixing and curved design, providing an elegant alternative to traditional knobs or handles. A potential consideration is its specific projection, which may influence drawer or door clearance in tight spaces.
All features
| Colour | Bronze |
|---|---|
| Model Part Number | 51214 |
| Brand | From the Anvil |
Extended Product Information
FAQs
What material is the Moore Edge Pull made from?
The Moore Edge Pull is manufactured from solid bronze, containing a minimum of 85% copper.
How is the pull attached?
It is fitted from the rear of the cabinet door or drawer using concealed fixings, with screws provided.
What are the dimensions of the 50mm pull?
The dimensions are 50mm in length, with fixing centers at 30mm, and a projection of 45mm.
What is the 'Aged Bronze' finish like?
The finish is very dark, rich, and has a matt appearance, achieved through a specialized aging process and protected by a matt lacquer.
Can I use these on any type of cabinet?
They are designed for wood or wood-based materials and are best suited for modern or minimalist aesthetics. Ensure the projection is compatible with your cabinet design.
Are screws included?
Yes, the pull is supplied with matching stainless steel wood screws.
How should I clean the pull?
Clean with a soft, damp cloth. Avoid abrasive cleaners to preserve the aged bronze finish and matt lacquer.
Troubleshooting
Pull is loose after installation
Ensure screws are fully tightened. Check that pilot holes were drilled correctly and are not stripped. If the wood is soft, consider using slightly larger screws or wood filler for a secure fit.
Screws do not align with pre-drilled holes
Re-measure and re-mark the fixing centers accurately. Ensure the pull is positioned straight along the edge before marking.
Finish appears inconsistent
This is characteristic of the hand-aged process. Minor variations contribute to the unique appearance. Ensure the lacquer is intact and clean gently.
Pros and Cons
Pros
- Provides a clean, contemporary look with no visible hardware on the front.
- The solid bronze construction ensures longevity and a high-quality feel.
- The curved edge offers a comfortable and practical grip for opening.
- The dark, matt aged bronze finish complements a wide range of modern interior styles.
- Easy to install with included matching screws.
Cons
- The 45mm projection may be too significant for very shallow drawers or doors.
- The dark finish might not suit traditional or very light-colored cabinetry.
- Requires precise drilling for the concealed fixings.
- Solid bronze, while durable, can be heavier than other materials.
- Specific cleaning and care may be needed to maintain the aged finish over time.
Setup, Compatibility & Care Instructions
Setup:
- Determine the desired placement on the top edge of the cabinet door or drawer.
- Measure and mark the fixing centers (30mm apart).
- Drill pilot holes for the supplied wood screws from the inside of the cabinet, ensuring they are straight.
- Position the edge pull on the exterior edge, aligning the screw holes.
- Secure the pull using the provided matching stainless steel wood screws from the inside.
Compatibility:
- Designed for use on the top edge of cabinet doors and drawers.
- Suitable for wood or wood-based materials.
- Consider the 45mm projection for clearance with adjacent drawers, doors, or appliances.
Care:
- The aged bronze finish is protected by a durable matt lacquer.
- Clean with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals which can damage the lacquer and finish.
- For stubborn marks, use a mild soap solution and wipe dry immediately.