Art3d 3D Wall Panels - Diamond Design - Antique Gold (Pack of 12 Tiles 32 Sq Ft)
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners and DIY enthusiasts looking to add a modern, textured accent to their living spaces. The Art3d 3D Wall Panels in Antique Gold offer a premium PVC solution for creating a striking feature wall or ceiling with a sophisticated diamond pattern and smooth finish, with the caveat that proper adhesive and surface preparation are crucial for a lasting installation. Key features include their lightweight, fire-resistant PVC construction, easy DIY application, and a significant aesthetic impact suitable for various interior applications.
All features
| Model Part Number | A10038GD |
|---|---|
| Brand | Art3d |
Extended Product Information
FAQs
What material are the Art3d 3D Wall Panels made of?
The panels are made of premium quality, lightweight, and fire-resistant PVC.
How many square feet does one box cover?
Each box contains 12 panels, which cover approximately 32 square feet.
What are the dimensions of each panel?
Each panel measures 19.7 inches by 19.7 inches (500mm x 500mm).
Can I install these panels myself?
Yes, these panels are designed for easy DIY installation and require minimal tools.
What kind of adhesive should I use?
A strong construction adhesive or heavy-duty panel adhesive suitable for PVC is recommended. Always follow the adhesive manufacturer's instructions.
Are these panels suitable for bathrooms or kitchens?
While PVC is water-resistant, it is not recommended for prolonged direct moisture exposure. They can be used in kitchens or powder rooms, but caution should be exercised around sinks and direct water sources. Ensure good ventilation.
How do I clean the panels?
Clean gently with a soft, damp cloth. Mild soap can be used if needed, but avoid abrasive cleaners.
Can the panels be painted?
While the Antique Gold finish is designed to be a final look, some users have successfully painted PVC panels with appropriate primers and paints. Test on a small, inconspicuous area first.
Troubleshooting
Panels not adhering well
Ensure the surface is thoroughly cleaned, dry, and smooth. Use a high-quality construction adhesive specifically recommended for PVC panels. Press firmly and allow adequate drying time for the adhesive.
Difficulty cutting panels cleanly
Use a sharp utility knife or a fine-toothed saw. Score the panel multiple times with the utility knife for a cleaner cut. Ensure a stable surface for cutting.
Uneven pattern alignment
Plan your layout carefully before installation. Start from a visible center point and work outwards. Use a level to ensure each panel is installed straight. Slight adjustments may be possible before the adhesive fully sets.
Dust accumulation in textured areas
Use a soft brush or a vacuum cleaner with a brush attachment to gently remove dust from the textured surfaces. A damp cloth can be used for deeper cleaning, but ensure it is not overly wet.
Pros and Cons
Pros
- Adds significant visual texture and a high-end look to walls and ceilings.
- Lightweight material makes them easy to handle and install.
- Fire-resistant properties enhance safety.
- DIY-friendly for cost-effective renovations.
- Versatile for use in various rooms and as accent pieces.
- The Antique Gold finish is distinct and visually appealing.
Cons
- Requires strong adhesive and careful surface preparation for proper adhesion.
- Can be more expensive than traditional paint or wallpaper.
- The 3D design may be challenging to clean thoroughly in textured areas.
- Color accuracy can vary slightly between batches.
- Not suitable for high-moisture areas unless specifically sealed.
Setup, Compatibility & Care
Setup:
- Surface Preparation: Ensure the wall or ceiling surface is clean, dry, smooth, and free from dust or grease. Minor imperfections should be smoothed out.
- Layout Planning: Plan the panel layout, starting from a central point and working outwards. Consider how the pattern will align at the edges.
- Adhesive Application: Apply a strong, suitable adhesive (e.g., construction adhesive or heavy-duty panel adhesive) evenly to the back of the panel or the wall surface, following the adhesive manufacturer's instructions.
- Panel Placement: Press the panel firmly into place, holding for a few moments to ensure adhesion. Use a level to ensure straight installation.
- Cutting: Panels can be cut using a utility knife or saw for edges and around outlets. Measure carefully before cutting.
Compatibility:
- Suitable for most interior wall and ceiling surfaces, including drywall, plaster, and wood.
- Not recommended for use in areas with extreme temperature fluctuations or direct, prolonged exposure to moisture.
Care:
- Clean with a soft, damp cloth. Mild soap can be used if necessary.
- Avoid abrasive cleaners or scouring pads, which can damage the surface finish.
- Wipe away any adhesive residue promptly.
- For textured areas, a soft brush may help remove dust.