Aputure 2-Bay Battery Power Station (V-Mount)
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Aputure 2-Bay Battery Power Station is designed for filmmakers and content creators needing extended runtimes for their 48V LED lights. It provides a consistent 48V DC output from two V-Mount batteries, significantly increasing power for lights like the Aputure Light Storm 600d or Nova P300c. A key benefit is the flexibility to power demanding fixtures without relying solely on AC power, though users must ensure their selected batteries can sustain the required discharge rate.
All features
| Model Part Number | AAKS2BPSV |
|---|---|
| Brand | Aputure |
Extended Product Information
FAQs
Can this power station charge my V-Mount batteries?
No, the Aputure 2-Bay Battery Power Station is designed solely to power compatible lighting fixtures. It does not have charging capabilities for the inserted batteries.
What type of batteries are compatible?
It is compatible with standard 14.4V/14.8V V-Mount batteries. For best performance, especially with higher wattage lights, it is recommended to use batteries with a high continuous discharge rating.
How long will my light run on this power station?
The runtime depends on the capacity (Wh) of the V-Mount batteries used and the power consumption of the connected light fixture. Using two higher-capacity batteries will result in longer runtimes.
Can I use batteries with different capacities?
While it can accept batteries of different capacities, it's best practice to use two identical batteries for balanced power delivery and optimal performance.
What is the maximum power output?
The power station can output a regulated 48V DC at up to 10 Amps, which equates to a maximum of 480 Watts.
Does it come with batteries?
No, the Aputure 2-Bay Battery Power Station is sold separately from V-Mount batteries.
What is the purpose of the 3-pin XLR connector?
The 3-pin XLR connector is the standard output port for the regulated 48V DC power. You will need a compatible 48V DC cable to connect your lighting fixture to this port.
Troubleshooting
Power station not outputting 48V DC.
Ensure both V-Mount batteries are properly seated and have sufficient charge. Verify that the batteries' continuous discharge rate is adequate for the connected light. Check the 3-pin XLR cable for damage.
Light flickers or dims unexpectedly.
This indicates the batteries may not be able to sustain the required discharge rate. Try using higher-capacity or higher-discharge-rate V-Mount batteries. Ensure the total power draw does not exceed 480W.
Power station feels unusually warm.
Some warmth is normal during high-power output. If it becomes excessively hot, immediately disconnect power. Ensure ventilation ports are not blocked and check battery compatibility.
Lightning Clamp Quick Release Plate is difficult to attach/detach.
Ensure the mounting surface is clean and free of debris. Align the plate correctly and apply firm, steady pressure. Check for any obstructions on the clamp mechanism.
Pros and Cons
Pros
- Enables extended runtimes for high-power LED lights.
- Offers flexible power solutions away from AC outlets.
- Lightweight and easy to transport on location.
- Integrated mounting system speeds up setup.
- Provides stable, regulated 48V DC output.
Cons
- Requires two V-Mount batteries, adding to initial cost.
- Performance depends heavily on the quality and discharge rate of the batteries used.
- Does not charge batteries; it only powers devices.
- 3-pin XLR output may require adapter cables for some older fixtures.
Setup, Compatibility & Care
Setup:
- Ensure two compatible 14.4V/14.8V V-Mount batteries are charged.
- Insert the batteries firmly into the designated bays until they click.
- Connect your 48V DC lighting fixture to the power station's 3-pin XLR output port using an appropriate cable.
- Mount the power station using the integrated Lightning Clamp Quick Release Plate to a stand or fixture.
Compatibility:
- Batteries: Compatible with industry-standard 14.4V/14.8V V-Mount batteries. For maximum output, use batteries with a high continuous discharge rating (e.g., 10A or higher).
- Lights: Designed for 48V DC LED lights, including Aputure Light Storm 600d, Nova P300c, Amaran 100/200 series, and other 48V fixtures up to 480W.
Care:
- Store the power station in a clean, dry environment.
- Avoid exposing the unit to extreme temperatures or moisture.
- Clean the exterior with a soft, dry cloth. Do not use liquid cleaners.
- Periodically check battery contacts for debris and clean if necessary.