Porcelaine 150 Outliner Paint - PEBEO
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The PEBEO Porcelaine 150 Outliner Paint is designed for artists, crafters, and home decorators looking to add precise, raised details to ceramic, porcelain, and glass surfaces. Its key benefit is creating intricate, dimensional patterns that become permanent and dishwasher-safe after oven-curing. A potential caveat is the need for proper heat-setting to achieve durability.
All features
| Brand | Pebeo |
|---|
Extended Product Information
FAQs
What surfaces can I use Pebeo Porcelaine 150 Outliner Paint on?
You can use it on porcelain, ceramic, glass, earthenware, and china.
How do I make the paint permanent?
After the paint has air-dried for at least 24 hours, heat-set it in a conventional oven at 150°C (300°F) for 35 minutes. Always refer to the specific product instructions for detailed curing information.
Is the paint dishwasher safe?
Yes, once properly heat-set, the decorated items are dishwasher safe. However, hand washing is recommended for extended durability.
Can I use this paint on items that will come into direct contact with food?
No, this paint is intended for decorative purposes and should not be used on surfaces that will come into direct contact with food or beverages.
How long does the paint take to dry before curing?
The paint should air dry for a minimum of 24 hours before heat-setting.
What is the shelf life of the paint?
When stored properly in its original, sealed tube in a cool, dry place, the paint typically has a shelf life of several years. Ensure the cap is tightly sealed between uses.
Can I paint over dried outliner paint?
While you can layer the outliner paint to build up detail, it's best to apply it in a single, controlled pass for optimal results. If you need to correct a mistake, gently wipe it away with a damp cloth before it dries.
Troubleshooting
Paint is not dispensing smoothly.
Ensure the nozzle is not clogged. Gently poke a pin into the nozzle opening if necessary. Shake the tube vigorously.
Lines are too thick or uneven.
Practice on scrap material. Apply gentle, consistent pressure to the tube. Ensure the nozzle tip is held at a consistent distance from the surface.
Paint is not permanent after oven curing.
Verify that the item was baked at the correct temperature for the recommended duration. Ensure the paint was fully dry before baking. Re-cure if necessary following instructions precisely.
Paint peels or flakes off.
Ensure the surface was thoroughly cleaned and degreased before application. Avoid applying to glossy or non-porous surfaces not recommended for use. Ensure proper curing.
Pros and Cons
Pros
- Adds a professional, high-quality finish to projects.
- Excellent control for detailed work.
- Durable and long-lasting once heat-set.
- Suitable for a variety of popular craft materials.
- Enhances the aesthetic appeal of ceramic and glass art.
Cons
- Requires careful heat-setting for permanence.
- Can be challenging for very large, solid areas.
- Dries relatively quickly, requiring precise application.
- Not suitable for direct food contact surfaces.
Setup, Compatibility & Care
Setup: Ensure the surface you are decorating is clean, dry, and free from grease. Shake the tube well before use. Apply the paint directly from the tube using the fine-tip nozzle. Allow the paint to air dry for at least 24 hours before heat-setting.
Compatibility: This paint is designed for use on porcelain, ceramic, glass, earthenware, and china. It is not recommended for use on surfaces in direct contact with food or beverages.
Care: After heat-setting in a conventional oven (typically at 150°C / 300°F for 35 minutes, consult specific product instructions), the decorated items are dishwasher-safe. Hand washing is recommended for longevity, especially for heavily used items. Avoid abrasive cleaners.