Bartoline Boiled Linseed Oil - 500mL
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Bartoline Boiled Linseed Oil is designed for homeowners looking to protect and enhance soft wood garden furniture, providing a natural sheen and preventing drying out. Its key benefit is accelerated drying due to included additives, however, it is not recommended for hardwoods like Oak or Teak, where Teak Oil is the preferred choice. This 500mL bottle offers a convenient size for various outdoor projects.
All features
| Model Part Number | BL4940 |
|---|---|
| Brand | Bartoline |
Extended Product Information
FAQs
What type of wood is Bartoline Boiled Linseed Oil best for?
It is ideal for treating soft woods such as pine, fir, or cedar. It is not recommended for hardwoods like Oak or Teak.
How many coats should I apply?
For optimal results and protection, apply 2 to 3 coats, allowing 24 hours of drying time between each application.
How do I prepare the wood before applying?
Ensure the surface is clean, dry, and free from old paint or stains. Sand if necessary and wipe with White Spirit to remove grease. Treat mildew with Fungicidal Wash if present.
Can I use this on interior wood?
While it can be used on interior softwoods, its primary purpose is for outdoor furniture protection. Ensure good ventilation during application and drying.
How do I clean my brushes or cloths after use?
Clean application tools immediately with White Spirit. Soiled cloths must be washed with soapy water and disposed of safely outdoors due to the risk of spontaneous combustion.
What is the drying time between coats?
Allow at least 24 hours for each coat to dry before applying the next.
Why is it important to dispose of cloths safely?
Linseed oil oxidizes and generates heat as it dries. Rags soaked in linseed oil can spontaneously combust if not properly handled, posing a fire risk.
Troubleshooting
Wood surface remains sticky after application
Excess oil was not removed adequately after application. Wipe the surface again with a clean cloth, potentially dampened slightly with White Spirit, to remove the sticky residue. Ensure future applications have all excess removed.
Wood still looks dry or untreated
The wood may not have absorbed enough oil, or not enough coats were applied. Ensure liberal application and consider applying an additional coat, allowing adequate drying time between each.
Slow or incomplete drying
Drying times can be affected by ambient temperature and humidity. Ensure the product is applied in suitable conditions and allow the full 24 hours between coats. If still wet after extended periods, ensure excess oil was wiped off properly.
Pros and Cons
Pros
- Effectively protects softwoods from drying out.
- Imparts a desirable natural sheen.
- Dries faster than conventional linseed oil.
- Suitable for a wide range of softwood garden furniture.
- Easy to apply with common tools.
Cons
- Not suitable for hardwoods like Oak or Teak.
- Requires careful disposal of used cloths due to spontaneous combustion risk.
- Can take up to 24 hours per coat to dry.
- Surface preparation is crucial for best results.
Setup, Compatibility & Care Instructions
Preparation is key for optimal results. Ensure the wood surface is clean and completely dry before application. Sand down any old paint or stains. For greasy surfaces, wipe down with White Spirit. If mildew is present, treat it with a suitable Fungicidal Wash before proceeding.
Application:
- Apply the Boiled Linseed Oil liberally using a clean cloth or brush.
- Rub the oil well into the wood grain.
- Wipe away any excess oil that sits on the surface.
- Allow a minimum of 24 hours for each coat to dry before applying the next.
- For best protection, apply 2-3 coats.
Compatibility: This product is best suited for *soft woods*. It is not recommended for hardwoods like Oak and Teak.
Cleaning: Clean application tools immediately after use with White Spirit.
After Care: *Crucially*, any cloths or rags used to apply or wipe away linseed oil must be washed immediately with soapy water and then disposed of safely outdoors. This is because they can spontaneously combust as the oil dries and oxidizes.