Lieber GU10 Downlight - Antique Brass
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Lieber Antique Brass GU10 Fire Rated Downlight is ideal for homeowners and builders seeking reliable, safety-compliant lighting for modern interiors. Its key benefit is offering robust fire protection (60 and 90 minutes) combined with an IP65 rating for use in bathrooms and kitchens. A minor consideration is that the GU10 bulb is not included and must be purchased separately. Key features include durable steel construction, easy installation with connector clips, and compatibility with LED and energy-saving lamps.
All features
| Model Part Number | 5056361246026 |
|---|---|
| Brand | LIEBER |
Extended Product Information
FAQs
Is a GU10 bulb included with the downlight?
No, the GU10 bulb is not included and must be purchased separately. The maximum recommended wattage is 35W.
What is the fire rating of this downlight?
This downlight is fire rated for both 60 minutes and 90 minutes, providing significant protection in case of fire.
Can this downlight be used in a bathroom?
Yes, with an IP65 rating, it is suitable for use in bathroom Zone 1, meaning it can withstand direct water jets.
What is the maximum ceiling thickness this downlight can fit?
The downlight is designed for ceilings up to 30mm thick, with adjustable springs that can accommodate up to 45mm.
Do I need a transformer for this light?
No, this downlight operates directly on 220-240V mains voltage and does not require a separate transformer.
What are the dimensions for the ceiling cut-out?
The required cut-out diameter for installation is 72mm.
What is the warranty period?
The downlight comes with a 3-year manufacturer's guarantee.
Troubleshooting
Light does not turn on
Check that the power supply is on. Ensure the GU10 bulb is correctly installed and functioning. Verify all wire connections are secure.
Dim or flickering light
Try a different GU10 bulb to rule out bulb failure. Ensure the bulb wattage does not exceed the 35W maximum. Check electrical connections for looseness.
Downlight feels loose in the ceiling
Adjust the spring clips to ensure they grip the ceiling material firmly. Check that the ceiling thickness is within the 30-45mm range.
Pros and Cons
Pros
- Excellent fire safety rating for enhanced protection.
- High IP rating suitable for wet areas like bathrooms and kitchens.
- Designed for straightforward installation with pre-attached clips.
- Durable construction ensures long-term use.
- Compatibility with energy-efficient LED bulbs.
- No additional transformer needed, simplifying setup.
Cons
- GU10 bulb is sold separately and must be purchased.
- Maximum bulb wattage is limited to 35W.
- Requires a specific cut-out size of 72mm.
- Antique brass finish may not suit all modern decor styles.
Setup, Compatibility & Care
Setup: Ensure the power is switched off before installation. Cut a hole of 72mm in the ceiling. Connect the appropriate wires to the connector clips provided. Insert the downlight into the ceiling aperture, allowing the adjustable springs to secure it firmly. The springs can be adjusted to accommodate ceilings up to 30mm thick, extending to 45mm. Install a GU10 bulb (max 35W, not included).
Compatibility: This downlight requires a standard GU10 bulb. It is compatible with standard 220-240V mains power and is designed for ceilings with a thickness up to 30mm (springs adjustable to 45mm). It is suitable for use with energy-saving and LED GU10 lamps.
Care: To clean, switch off the power supply and wipe the fitting with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the antique brass finish.