Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This Premium 6mm Glass Kitchen Splashback by Warren Reed - Designer is for homeowners looking to enhance their kitchen's aesthetic appeal and functionality. Its key benefit is providing a durable, hygienic, and stylish surface that's easy to maintain. A key consideration is the specific adhesive required for installation. This splashback features high-resolution printing on toughened glass, offering a striking focal point that is both scratch-resistant and capable of withstanding heat.
| Model Part Number | WR00522-P450 |
|---|---|
| Brand | Warren Reed - Designer |
You should use a clear, natural-curing adhesive specifically designed for glass installations. Always refer to the adhesive manufacturer's instructions for best results.
Yes, this splashback is suitable for use behind most kitchen hobs, including gas and electric. It is rated to withstand temperatures up to 400°C.
Clean the splashback with a soft, damp cloth and a mild kitchen cleaner. Avoid abrasive materials. Wipe dry with a soft cloth to prevent streaks.
This specific model is available in W600mm x H600mm. Other sizes such as W600mm x H750mm, W700mm x H750mm, W900mm x H750mm, W600mm x H650mm, W700mm x H650mm, and W900mm x H650mm are also available in the range.
The splashback is made from toughened glass, which is designed to be more resistant to breaking than standard glass. If it does break, it typically shatters into small, relatively harmless pieces.
The splashback comes with a 1-year guarantee.
No, the design is intended for installation using adhesive, meaning no drilling is required, making installation quicker and cleaner.
Ensure the wall is clean, dry, and free of dust. Use the recommended natural-curing adhesive and follow its application instructions precisely. Allow adequate curing time.
Use a non-abrasive glass cleaner and a soft microfiber cloth. Avoid excessive cleaner or allow it to dry on the surface. Wipe dry immediately after cleaning.
Inspect the splashback for damage upon receipt. While scratch-resistant, very sharp or abrasive objects could potentially cause damage. Contact customer support if significant damage occurs.
Glass splashbacks are pre-cut and not designed for on-site modification. Attempting to cut toughened glass can cause it to shatter. Ensure you have selected the correct size before purchase.
Setup:
Installation requires a clear, natural-curing adhesive. Ensure the wall surface is clean, dry, and smooth before application. Carefully apply the adhesive to the wall or the back of the glass according to the adhesive manufacturer's instructions. Press the splashback firmly into place, ensuring even contact. Allow the adhesive to cure fully before exposing the splashback to heat or moisture.
Compatibility:
This splashback is designed for use behind kitchen hobs and cookers, providing a protective barrier. It is compatible with most standard kitchen wall surfaces when using the recommended adhesive.
Care:
Clean the surface with a damp cloth and a mild kitchen cleaner. Avoid abrasive cleaners or scouring pads, which may scratch the glass. For stubborn marks, a non-abrasive glass cleaner can be used. Wipe dry with a soft cloth.
