Bathroom Splashback - Vintage Pink Textured Roses Glass
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Warren Reed glass splashback is ideal for homeowners seeking an elegant, practical, and hygienic update for their bathroom basin area. Its key benefit is providing a stylish, grout-free alternative to tiles that is highly resistant to moisture and stains. A potential caveat is its specific size, W600mm x H250mm, which may require careful placement planning. This splashback offers a sophisticated look with a high-quality print on toughened glass, easy maintenance, and a simple, drill-free installation process.
All features
| Model Part Number | 5056782158953 |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What is the exact size of this splashback?
The splashback measures W600mm x H250mm.
Do I need to drill holes in the glass for installation?
No, installation is designed to be drill-free. You will use a suitable silicone adhesive (not included) to attach it to the wall.
Can I cut this glass splashback to a different size?
No, this product is handmade and cannot be cut. It is intended for installation as-is at its specified dimensions.
What type of adhesive should I use?
A high-quality neutral cure silicone adhesive suitable for glass and bathroom environments is recommended. Please refer to the adhesive manufacturer's instructions for application and curing.
Is this splashback suitable for areas other than behind a basin?
While designed for bathrooms, it is best suited for areas with minimal direct water exposure, like behind a basin. It is not recommended for showers or direct high-pressure water sources.
How do I clean the glass surface?
Clean using a soft, damp cloth with warm, soapy water. Avoid abrasive cleaners. Dry with a soft cloth to prevent water spots.
What is the warranty period?
Please refer to the retailer or manufacturer's documentation for specific warranty information, as it is not provided in the product details.
Troubleshooting
Splashback not adhering properly
Ensure the wall surface is thoroughly cleaned, dried, and completely smooth. Reapply a high-quality silicone adhesive suitable for glass and wall mounting, ensuring even coverage and adequate curing time.
Smudges or streaks after cleaning
Use a clean, soft microfiber cloth for cleaning and drying. Avoid using too much water or cleaning solution. A final buff with a dry cloth should remove any remaining streaks.
Print appears faded or damaged
This is unlikely under normal use. Ensure you are using only recommended cleaning methods and avoiding abrasive materials. If damage has occurred, contact customer support.
Difficulty positioning splashback during installation
Have a second person assist with holding and positioning the splashback. Measure and mark the desired position lightly on the wall beforehand to guide placement.
Pros and Cons
Pros
- Provides a beautiful, modern aesthetic without grout lines.
- Highly resistant to bathroom-specific issues like moisture, mould, and stains.
- Simple to clean with standard household cleaners.
- Quick and easy installation, minimizing disruption.
- Durable construction with 6mm toughened safety glass.
Cons
- Fixed size (W600mm x H250mm) may not fit all basin areas.
- Requires a smooth, clean surface for proper adhesion.
- Glass can be heavy, requiring careful handling during installation.
- Design is specific and may not match all bathroom decors.
- Potential for glare depending on bathroom lighting.
Setup, Compatibility & Care
Setup:
Installation is designed to be straightforward and does not require drilling into your walls. Ensure the wall surface behind the basin is clean, dry, and smooth. Apply a suitable silicone adhesive (not included) to the back of the glass splashback according to the adhesive manufacturer's instructions. Carefully position the splashback against the wall, ensuring it is straight and flush. Hold in place for a few minutes until the adhesive begins to set. Allow the adhesive to cure fully for at least 24 hours before exposing the area to significant moisture. Full instructions are provided with the product.
Compatibility:
This splashback is designed for use behind bathroom basins. It is compatible with most standard basin installations. The wall surface must be smooth, non-porous, and structurally sound for secure adhesion. It is not recommended for use behind cooktops or in areas subject to extreme heat or direct high-pressure water jets.
Care:
To clean, use a soft, damp cloth with warm, soapy water. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can scratch or damage the surface print. For stubborn marks, a mild glass cleaner can be used sparingly. Dry thoroughly with a clean, soft cloth to prevent water spots.