Integral LED Downlight - Recessed - Satin Nickel
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using the Integral LED Evofire downlight. The key benefit is its can-less design, which improves airflow and extends the LED lamp's life. However, keep in mind that you'll need to purchase a GU10 LED lamp separately. This downlight features a recessed design for reduced glare, an ultra-thin bezel for a flush fit, and is fire-resistant, making it suitable for various applications, including kitchens and bathrooms.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 69071 |
| Brand | Integral LED |
Extended Product Information
FAQs
What type of lamp does this downlight use?
It uses a GU10 LED lamp.
What is the maximum wattage for the GU10 lamp?
The maximum wattage is 10W.
Is this downlight suitable for bathrooms?
Yes, it is IP65 rated, making it suitable for kitchens and bathrooms.
What are the dimensions of the downlight?
The diameter is 85mm, with a depth of 38mm, and requires a 70mm cut-out.
Is the lamp included with the downlight?
No, the GU10 LED lamp is not included and must be purchased separately.
What is the fire rating of this downlight?
It is fire-resistant and complies with building regulations. It supports solid timber fire ratings of 30-60-90 minutes and I-joist ratings of 30-60 minutes.
How do I install this downlight?
Installation involves creating a 70mm cut-out, connecting the wiring to the screwless push-fit terminals, inserting the downlight, and installing the GU10 lamp.
Can I use this downlight with a dimmer switch?
Compatibility with dimmer switches depends on the GU10 LED lamp used. Check the lamp specifications for dimming compatibility.
Troubleshooting
Downlight doesn't turn on.
Check the power supply and ensure the circuit breaker is on. Verify the GU10 LED lamp is correctly installed and functioning. Check the wiring connections at the screwless push-fit terminals to make sure they are secure.
Flickering light.
The GU10 LED lamp might be faulty, or the power supply is unstable. Try replacing the lamp with a new one. If the problem persists, check for loose wiring connections.
Dim light output.
The GU10 LED lamp may have a low wattage or may not be compatible. Ensure you are using a maximum 10W GU10 LED lamp. Check the lamp specifications.
Downlight too hot.
This is unlikely due to the LED lamp, but ensure the lamp wattage does not exceed the maximum allowed (10W). Ensure the downlight has sufficient airflow around it.
Pros and Cons
Pros
- Improved airflow extends LED lamp life.
- Recessed design minimizes glare.
- Easy installation with screwless terminals.
- Fire-resistant, providing enhanced safety.
- Suitable for wet environments due to IP65 rating.
- Sleek and modern aesthetic with a flush ceiling fit.
Cons
- Requires a separate purchase of a GU10 LED lamp.
- Installation requires a 70mm cut-out in the ceiling.
- Limited to a maximum 10W GU10 LED lamp.
- May require professional installation depending on your DIY skills and wiring knowledge.
- The satin nickel finish may not suit all interior design styles.
Setup, Compatibility & Care
Setup
- Preparation: Ensure the power is turned off at the circuit breaker. Measure and create a 70mm cut-out in the ceiling.
- Wiring: Connect the mains supply to the screwless push-fit terminals.
- Installation: Insert the downlight into the cut-out and secure it.
- Lamp Insertion: Install a GU10 LED lamp (maximum 10W).
- Testing: Turn the power back on and test the downlight.
Compatibility
- Lamp: Compatible with GU10 LED lamps (maximum 10W).
- Environment: Suitable for kitchens and bathrooms due to the IP65 rating.
- Fire Rating: Compatible with solid timber fire ratings of 30-60-90 minutes and I-joist ratings of 30-60 minutes.
Care
- Cleaning: Use a soft, dry cloth to clean the downlight. Avoid harsh chemicals or abrasives.
- Lamp Replacement: Always turn off the power before replacing the lamp. Use only compatible GU10 LED lamps.