Wetwall Elite Bathroom Wall Panel - Artico Plastic
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Wetwall Elite Bathroom Wall Panel in Artico Plastic is for homeowners seeking a modern, waterproof, and easy-to-install alternative to traditional bathroom tiles. Its key benefit is providing a luxurious, grout-free finish that is simple to clean and can be installed quickly, offering an instant bathroom makeover. A potential caveat is the need for proper surface preparation if installing over existing tiles.
All features
| Model Part Number | 503288 |
|---|---|
| Brand | Wetwall |
Extended Product Information
FAQs
Can I install this panel over my existing tiles?
Yes, the Wetwall Elite Bathroom Wall Panel can be installed over existing tiles provided they are firmly adhered, smooth, and the surface is properly prepared according to the manufacturer's instructions.
What tools do I need for installation?
You will need a measuring tape, a pencil, a fine-toothed saw or jigsaw for cutting, a sealant gun, and potentially a spirit level. Ensure you use Wetwall-approved adhesive and sealant.
How do I clean the panels?
Clean the panels with a soft, damp cloth and a mild, non-abrasive detergent. Rinse with clean water and dry with a soft cloth. Avoid abrasive cleaners or solvents.
Is this panel suitable for a steam shower?
The panel is 100% waterproof and ideal for shower walls. For steam showers, ensure adequate ventilation and that all joints and edges are perfectly sealed to prevent steam penetration.
What is the warranty period?
The product comes with a lifetime manufacturer guarantee, subject to terms and conditions. Please refer to the manufacturer's documentation for full details.
Can I paint or re-finish the panels?
The decorative top sheet is designed to be the final finish. Painting or re-finishing is not recommended and may void the warranty.
How long does installation typically take?
An instant makeover can be achieved, with installation times potentially as short as 2.5 hours for a small shower area, depending on the complexity and experience of the installer.
Troubleshooting
Panel does not adhere properly
Ensure the wall surface is clean, dry, and free of dust or grease. Use the correct type and amount of Wetwall-approved adhesive. Ensure adequate pressure is applied during installation.
Visible gaps between panels
Verify that panels are cut precisely and installed plumb. Ensure the correct adhesive is used to hold panels tightly together before sealing. Re-cut or adjust if necessary.
Water ingress behind the panel
Check that all edges and joints have been properly sealed with the recommended sealant. Ensure sealant is applied generously and covers the entire seam. Inspect for any missed areas or cracks in the sealant.
Surface scratches or marks
Clean gently with a soft cloth and mild detergent. For minor scratches, a specific plastic restorer might be applicable, but test in an inconspicuous area first. Avoid abrasive cleaning methods.
Pros and Cons
Pros
- Significantly reduces installation time compared to tiling.
- Waterproof construction prevents mold and mildew growth associated with grout.
- Easy to clean and maintain due to the smooth, grout-free surface.
- Provides a modern, high-end aesthetic at a lower cost.
- Can be installed over existing surfaces, minimizing disruption.
- Backed by a lifetime manufacturer guarantee (subject to T&Cs).
Cons
- Requires specific sealant and adhesive for proper installation.
- Cutting and fitting may require specialized tools for a precise finish.
- Surface preparation is crucial if installing over existing tiles.
- May not offer the same tactile texture or aesthetic variety as natural stone or ceramic tiles.
- Potential for damage if improperly handled during installation.
- Availability of matching accessories might be limited.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the wall surface is clean, dry, and structurally sound. If installing over existing tiles, ensure they are firmly adhered and the surface is smooth.
- Measure and cut panels as needed using appropriate cutting tools. Always wear safety glasses.
- Apply recommended Wetwall sealant and adhesive to the back of the panel or the wall surface according to product instructions.
- Press the panel firmly into place, ensuring a tight fit against adjacent panels.
- Use recommended sealant along all edges, corners, and joints.
Compatibility:
- Compatible with most standard bathroom substrates, including plasterboard, existing tiles, and concrete.
- Requires specific Wetwall sealant and adhesive for optimal performance and warranty adherence.
Care:
- Clean regularly with a soft, damp cloth and mild, non-abrasive detergent.
- Avoid harsh chemicals, abrasive cleaners, or scouring pads that could damage the decorative surface.