Bison Rear View Car Mirror Adhesive - 2ml Syringe
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone needing to reattach a rear-view mirror to their car's windshield. The Bison Rear View Car Mirror Adhesive provides a strong, permanent bond, ensuring your mirror stays secure. Note that the adhesive requires a full 24 hours to cure completely for optimal performance.
All features
| Model Part Number | 6305427 |
|---|---|
| Brand | Bison |
Extended Product Information
FAQs
How long does the adhesive take to dry?
The adhesive takes approximately 24 hours to cure completely.
Can I use this adhesive on tinted windows?
Yes, it can be used on tinted windows, provided the tint is properly adhered and not easily damaged.
Is the adhesive waterproof?
Yes, the adhesive is waterproof once fully cured.
What if I get adhesive on my skin?
Wash the affected area immediately with soap and water. If irritation persists, consult a physician.
How do I store the remaining adhesive?
Reseal the syringe cap tightly and store it in a cool, dry place. The remaining adhesive can be used for future applications.
What should I do if the mirror is misaligned after application?
Carefully detach the mirror (if possible before it fully cures). Clean the surfaces and reapply the adhesive, ensuring proper alignment before allowing it to cure.
Does it work on all types of mirrors?
The adhesive is designed for standard car mirrors. Ensure the mirror's mounting surface is compatible.
What is the shelf life of the adhesive?
If stored properly, the adhesive has a shelf life of approximately one year from the manufacturing date.
Troubleshooting
Mirror detached shortly after application.
Ensure surfaces were properly cleaned and dried before applying the adhesive. Reapply adhesive following the instructions, and ensure it cures for a full 24 hours without disturbance.
Adhesive not bonding properly.
Make sure the adhesive is fresh (not expired). Verify that the application surface is free of any residue. Apply a thicker layer of the adhesive.
Visible adhesive residue.
If excess adhesive is visible, carefully remove it with a clean cloth before it dries. Be careful not to dislodge the mirror. Isopropyl alcohol can help remove residue.
Pros and Cons
Pros
- Easy to use syringe
- Creates a strong and permanent bond
- Temperature and vibration resistant
- Dries clear for a clean look
- Includes gauze for surface preparation
Cons
- Requires a 24-hour curing time
- May not be suitable for all types of windshields (e.g., those with special coatings)
- Limited quantity in the syringe for larger mirrors or multiple applications
- Surface preparation is key for optimal results
Setup, Compatibility & Care
- Preparation:
- Clean the mounting surface of the mirror and the windshield thoroughly with the included gauze or isopropyl alcohol.
- Ensure both surfaces are completely dry before applying the adhesive.
- Application:
- Apply a thin, even layer of adhesive to the mirror's mounting surface.
- Press the mirror firmly against the windshield in the correct position.
- Hold the mirror in place for a few minutes to ensure initial adhesion.
- Curing:
- Allow the adhesive to cure for a full 24 hours before putting any stress on the mirror.
- Compatibility:
- This adhesive is compatible with most standard car mirrors and windshields.
- Not recommended for use with windshields that have special coatings.
- Care:
- Avoid excessive heat or cold during the curing period.
- Once cured, the adhesive is resistant to normal driving conditions.