Frenchic Panther Trim Paint - Black
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Frenchic Panther Trim Paint in Black is ideal for DIY enthusiasts and furniture renovators looking to achieve a sophisticated, durable finish on interior woodwork, furniture, and radiators. Its key benefit is a simplified application process requiring no primer or topcoat, offering a soft-satin, scuff-resistant sheen. A potential caveat is its specific suitability for interior use only.
All features
| Colour | Black |
|---|---|
| Model Part Number | 40315049738327 |
| Brand | Frenchic |
Extended Product Information
FAQs
Do I need a primer or topcoat with this paint?
No, Frenchic Panther Trim Paint is formulated as a self-priming and self-sealing paint, eliminating the need for separate primer or topcoat applications for most interior surfaces.
What surfaces can I use this paint on?
It is suitable for interior woodwork, trims, skirting boards, doors, powder-coated radiators, metal, and various furniture types including wood and laminate.
Is this paint suitable for exterior use?
No, this paint is specifically designed for interior use only. It is not recommended for outdoor applications or areas exposed to weather.
How should I clean painted surfaces?
Clean gently with a soft, damp cloth. Avoid abrasive cleaners or scouring pads. For tougher marks, use a mild soap solution sparingly and rinse with a clean, damp cloth.
How much area does a 500ml tin cover?
A 500ml tin will cover approximately 7m² with a single coat. For a more durable finish with two coats, expect to cover about 3.5m².
Is this paint safe for children's furniture or toys?
Yes, the paint is EN71-3 certified, which means it is safe for use on children's toys and furniture.
What is the finish like?
The paint provides a sleek and lustrous off-black finish with a soft-satin sheen.
Troubleshooting
Paint is not adhering well
Ensure the surface was properly cleaned and degreased before application. For very slick surfaces like laminate or previously high-gloss paint, a light scuff sand may be necessary. Ensure adequate drying time between coats.
Uneven finish or brush marks visible
Apply paint in thin, even coats using a good quality brush or roller. Avoid overworking the paint. Ensure consistent lighting during application. Allow sufficient drying time between coats.
Finish feels soft or easily scratched after curing
The paint may not have been allowed to cure fully. Ensure the recommended curing time (up to 14 days) has passed. Avoid heavy use or cleaning until fully cured. Ensure two coats were applied for optimal durability.
Paint is too thick to apply smoothly
While designed for minimal thinning, if necessary for your application method, a *very small* amount of water can be added. Stir thoroughly. However, avoid over-thinning, which can compromise the finish.
Pros and Cons
Pros
- Simplified application process reduces time and effort.
- Durable, scuff-resistant finish enhances longevity.
- Low VOC and low odour for a healthier indoor environment.
- Multi-surface suitability increases project versatility.
- Child-safe certification provides peace of mind for specific projects.
- Elegant, soft-satin finish adds a premium look.
Cons
- Limited to interior use only.
- Coverage estimates require careful consideration for two coats.
- May not be suitable for high-moisture environments without additional sealing.
Setup, Compatibility & Care
Preparation:
Ensure the surface is clean, dry, and free from grease or loose paint. For most surfaces, no specific primer is needed. If painting over a very glossy or slick surface, a light scuff sand may improve adhesion, followed by thorough dust removal.
Compatibility:
This paint is recommended for:
- Interior woodwork, trims, skirting boards, and doors.
- Powder-coated radiators.
- Metal surfaces.
- Various furniture types, including wood and laminate.
It is not recommended for exterior use or areas with high moisture exposure without appropriate sealing.
Care and Maintenance:
Allow the paint to cure fully (typically 7-14 days for maximum hardness) before heavy use or rigorous cleaning. Clean using a soft, damp cloth. Avoid abrasive cleaners or scouring pads, as these can damage the finish. For tougher marks, a mild soap solution can be used sparingly, followed by a clean damp cloth rinse.