Renotub Premium 2K Bath Resurfacing Repair Enamel Paint - Brilliant White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to renew their bathroom fixtures with Renotub, a durable 2K coating. It offers excellent adhesion and color retention, ideal for bathtubs, sinks, and more. Keep in mind that Renotub is not suitable for galvanized steel or flexible plastic. This guide will walk you through the key features, best practices for application, and troubleshooting tips to ensure a successful refinishing project.
All features
| Colour | White |
|---|---|
| Brand | Renotub |
Extended Product Information
FAQs
What surfaces can I use Renotub on?
Renotub can be used on cast iron, steel, enamel, ceramic porcelain, and fiberglass fixtures. It is ideal for bathtubs, sinks, toilets, and bidets.
Can I use Renotub on galvanized steel?
No, Renotub is not suitable for use on galvanized steel or flexible plastic.
What color is Renotub available in?
Renotub is available in Brilliant White Ral 9016.
How do I prepare the surface before applying Renotub?
Clean the surface to remove dirt and grease, sand lightly for adhesion, and rinse and dry thoroughly.
How should I mix Renotub?
Combine equal parts (250ml each) of Part A coating and Part B activator/hardener. Mix thoroughly until the mixture is uniform.
How many coats of Renotub should I apply?
Apply multiple thin coats, allowing each coat to dry according to the manufacturer's instructions.
How do I clean fixtures coated with Renotub?
Clean with mild soap and water. Avoid abrasive cleaners and harsh chemicals.
How long does it take for Renotub to cure?
Allow the coating to fully cure before use. Follow the manufacturer's instructions for curing time, which may vary depending on environmental conditions.
Troubleshooting
Coating is not adhering properly.
Ensure the surface is properly prepared by cleaning, sanding, and drying before application. Ensure the correct mixing ratio of Part A and Part B.
Coating is running or dripping.
Apply thinner coats and avoid over application. Ensure the environment is not too hot or humid during application.
Coating is not drying.
Make sure you have mixed Part A and Part B correctly. Ensure the room temperature is adequate for drying, or the product is not expired. Check the manufacturer's drying time instructions.
Pros and Cons
Pros
- Provides a durable and long-lasting finish.
- Enhances the appearance of fixtures with a brilliant white color.
- Offers excellent adhesion to various surfaces.
- Easy to apply, suitable for DIY projects.
- Specifically formulated for high moisture areas.
Cons
- Not suitable for use on galvanized steel or flexible plastic.
- Requires proper surface preparation for optimal results.
- Application requires mixing of two parts which requires accuracy.
- Limited to the Brilliant White Ral 9016 color.
Setup, Compatibility & Care
- Preparation:
- Clean the surface thoroughly to remove all dirt, grease, and old coatings.
- Sand the surface lightly to promote adhesion.
- Rinse and dry the surface completely.
- Mixing:
- Combine 250ml of Part A coating with 250ml of Part B activator/hardener.
- Mix thoroughly until the mixture is uniform.
- Use the mixture within the recommended pot life (follow product instructions).
- Application:
- Apply the coating evenly using a brush or roller.
- Apply multiple thin coats, allowing each coat to dry according to the manufacturer's instructions.
- Avoid runs and drips.
- Compatibility:
- Compatible with cast iron, steel, enamel, ceramic porcelain, and fiberglass.
- Not compatible with galvanized steel or flexible plastic.
- Care:
- Allow the coating to fully cure before use (follow product instructions).
- Clean with mild soap and water.
- Avoid abrasive cleaners and harsh chemicals.