Collall Wood Glue - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Collall Wood Glue in White is designed for DIY enthusiasts and crafters working with wood, cork, felt, expanded polystyrene, and various synthetic materials. Its primary benefit is providing a quick-drying, strong, and water-resistant bond, ideal for a wide range of projects. A potential caveat is its white color, which may be visible on darker woods if not carefully applied or cleaned.
All features
| Colour | White |
|---|---|
| Model Part Number | 228312 |
| Brand | Collall |
Extended Product Information
FAQs
Is this glue suitable for outdoor use?
The glue forms a water-resistant film once cured, making it suitable for items that may encounter light moisture. However, it is not fully waterproof and is not recommended for permanent outdoor applications that are constantly exposed to heavy rain or submersion.
Can I paint over the dried glue?
Yes, once the glue is completely dry, you can paint over it. The white color may provide a good base for some paints.
How long does it take to fully cure?
While the glue becomes workable and holds pieces together relatively quickly (often within minutes), it takes approximately 24 hours to reach its maximum bond strength and water resistance.
What is the shelf life of Collall Wood Glue?
When stored correctly in a sealed container in a cool, dry place, Collall Wood Glue typically has a shelf life of 1-2 years.
Can I use this glue on laminate flooring?
This glue is not specifically designed for laminate flooring. For flooring applications, it's best to use adhesives recommended by flooring manufacturers.
Is the glue non-toxic?
Collall Wood Glue is water-based and generally considered safe for craft and DIY use. However, as with any adhesive, avoid ingestion and prolonged skin contact. Ensure good ventilation during use.
Troubleshooting
Glue is not sticking properly
Ensure surfaces are clean, dry, and free from dust or grease. Reapply glue evenly and ensure sufficient pressure is applied while drying.
Glue is drying too quickly during application
Work in smaller sections. Have all materials ready before applying glue. If the climate is very dry, consider slightly increasing humidity in the work area.
Excess glue is difficult to remove
Wipe away excess glue with a damp cloth *immediately* after application. Once dry, hardened glue can be carefully scraped or sanded away.
Bottle nozzle is clogged
Carefully clear any dried glue from the nozzle using a pin or small wire. Ensure the cap is sealed tightly when not in use.
Pros and Cons
Pros
- Dries quickly to speed up projects.
- Forms a water-resistant bond for durability.
- Adheres to a wide variety of porous and semi-porous materials.
- Includes a precise applicator for controlled use.
- Water-based formula is easy to clean.
Cons
- White color may be noticeable on dark wood.
- Requires clean surfaces for optimal adhesion.
- Water resistance is not complete waterproofing; not suitable for prolonged submersion.
Setup, Compatibility & Care
Setup:
- Ensure all surfaces to be bonded are clean, dry, and free from dust, grease, or debris.
- Apply a thin, even layer of glue to one surface using the applicator.
- For porous materials, a slightly thicker layer may be applied.
- Press the surfaces firmly together immediately after application.
- Wipe away any excess glue with a damp cloth before it dries.
- Allow the bond to cure fully (typically 24 hours for maximum strength, though handling may be possible much sooner).
Compatibility:
This glue is ideal for wood, cork, felt, expanded polystyrene (EPS), and various synthetic materials. It is not recommended for polyethylene, polypropylene, or Teflon. Always test on an inconspicuous area for unknown materials.
Care:
Store the glue in its original bottle in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cap is tightly sealed after each use to prevent the glue from drying out.