Sika Wood Preserver - Clear, 5 Litre - SIKA - SKGDWPCL5
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Sika SKGDWPCL5 Wood Preserver to protect wood from rot and decay. The key benefit is its ability to penetrate and protect wood in damp or wet conditions, both indoors and outdoors. A caveat is that while it offers excellent coverage, proper surface preparation is essential for optimal results. This guide will provide information about its use, setup, and maintenance.
All features
| Model Part Number | SKGDWPCL5 |
|---|---|
| Brand | Sika |
Extended Product Information
FAQs
How much area does a 5-litre container cover?
A 5-litre container typically covers 15-20 m², depending on the wood type and application method.
Can I use this product on exterior wood?
Yes, Sika Wood Preserver is suitable for both interior and exterior use.
What is the drying time?
Drying times can vary, so refer to the product label for specific instructions.
Do I need to sand the wood before applying the preserver?
Yes, it is recommended to sand the wood to ensure the surface is clean, dry and free from any old finishes. This improves the penetration of the preserver.
Is this product suitable for use on treated wood?
It is generally suitable, but it's best to check the compatibility on the product label or consult with the manufacturer.
How should I store the product?
Store in a cool, dry place, away from direct sunlight.
Can I apply this product with a spray gun?
Yes, you can apply this product with a spray gun. Ensure the settings are correct for the best result.
Troubleshooting
The wood preserver isn't penetrating the wood.
Ensure the wood surface is properly prepared. Sand or clean the wood surface to remove any existing coatings or debris that may be preventing penetration. Consider thinning the product slightly if necessary, but always follow the manufacturer's guidelines.
The treated wood is taking too long to dry.
Ensure adequate ventilation during the drying process. Check the ambient temperature and humidity levels, as these can affect drying times. If the humidity is high, consider using a dehumidifier to speed up drying.
Uneven application or finish.
Apply the product evenly, avoiding drips or pooling. If applying multiple coats, allow each coat to dry completely before applying the next one.
Pros and Cons
Pros
- Protects wood from rot and decay.
- Suitable for use in damp/wet conditions.
- Low-odour and solvent-free formula for easier application.
- Effective penetration due to Micro-fine Active Technology.
- Provides a generous coverage area.
Cons
- Requires proper surface preparation for best results.
- May require multiple coats for heavily exposed areas.
- The product's effectiveness depends on correct application.
Setup, Compatibility & Care
- Preparation: Ensure the wood surface is clean, dry, and free from existing finishes or coatings. Remove any loose paint, varnish, or debris.
- Application: Apply the wood preserver using a brush, roller, or spray, as directed on the product label. Apply evenly.
- Drying Time: Allow the treated wood to dry completely before applying additional coats or exposing it to the elements. Drying times may vary depending on environmental conditions.
- Compatibility: This product is suitable for use on most types of wood and joinery.
- Care: After application, clean tools with water. Store the product in a cool, dry place, away from direct sunlight.