Shopping.co.uk

BirdDog MAKI Live PoE Adapter

Not AvailableBirdDog MAKI Live PoE Adapter

The BirdDog PoE Adaptor for MAKI Live delivers power to your BirdDog Maki camera via a single Ethe...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Similar alternatives

TP-Link PowerLine Network Adapter Kit - TL-WPA4220 KIT V4From £40View product TP-Link Powerline Extender - AV1000 Gigabit, AC1200 Wi-Fi - TL-WPA7617 (UK)From £60View product Powerline Adapter Kit - TP-Link TL-PA7017P KIT (UK)From £50View product TP-Link G.hn2400 Powerline AX1800 Wi-Fi 6 Kit - PGW2440 KIT (UK)From £130View product

Product Information

Full details

The BirdDog MAKI Live PoE Adapter is designed for live event producers, studio operators, and remote production teams seeking a streamlined power solution for their BirdDog Maki cameras. Its primary benefit is delivering power and data over a single Ethernet cable, significantly reducing cable clutter and simplifying setup. A potential consideration is that it specifically requires a PoE-enabled network switch or injector to function.

All features

Model Part NumberBDMKLPA
BrandBirdDog

Extended Product Information

FAQs

Does this adapter provide data connectivity as well as power?

Yes, the adapter allows both power and network data to be transmitted over a single Ethernet cable to the BirdDog Maki camera.

What type of Ethernet cable should I use?

Standard Ethernet cables such as Cat 5e, Cat 6, or Cat 6a are suitable. Ensure the cables are in good condition.

Can I use this adapter with any BirdDog camera?

No, this adapter is specifically designed for the BirdDog MAKI Live camera model.

What happens if my network switch is not PoE-enabled?

If your network switch is not PoE-enabled, you will need to use a separate PoE injector connected between the switch and the adapter's `PoE IN` port.

What is the maximum distance I can run the Ethernet cable?

The standard Ethernet cable length limitation of 100 meters (328 feet) applies when using this adapter.

Do I need any special software to set this up?

No special software is required. The adapter functions at the hardware level, passing power and data through the Ethernet connection.

Troubleshooting

BirdDog Maki camera does not power on

Verify that the network switch or PoE injector is providing power and is correctly connected to the `PoE IN` port. Ensure the Ethernet cable between the adapter and the camera is securely connected and functional.

Intermittent video signal or connectivity issues

Check the integrity of both Ethernet cables. Try swapping cables with known good ones. Ensure the network switch is functioning correctly and not overloaded. Verify the camera is within the maximum Ethernet cable length (typically 100 meters).

Adapter is warm to the touch

Some warmth is normal during operation. Ensure the adapter has adequate ventilation and is not covered or placed in a confined space. If excessively hot, disconnect power and check for obstructions or damage.

Pros and Cons

Pros

  • Reduces cable clutter significantly.
  • Simplifies camera setup and deployment.
  • Provides a reliable power source for Maki cameras.
  • Compact design saves space and integrates easily.
  • Cost-effective by leveraging existing PoE infrastructure.

Cons

  • Requires a PoE-enabled network switch or injector.
  • Only compatible with BirdDog Maki cameras.
  • Adds an extra device in the signal chain.
  • Does not provide additional features beyond power delivery.

Setup, Compatibility & Care

Setup:

  1. Connect an Ethernet cable from your PoE-enabled network switch or PoE injector to the `PoE IN` port on the BirdDog MAKI Live PoE Adapter.
  2. Connect another Ethernet cable from the `CAMERA OUT` port on the PoE Adapter to the Ethernet port on your BirdDog Maki camera.
  3. Ensure your network switch or injector is powered on and configured correctly.

Compatibility:

  • This adapter is specifically designed for BirdDog MAKI Live cameras.
  • Requires a PoE-compliant network switch (IEEE 802.3af/at) or a PoE injector.
  • Uses standard Ethernet (Cat 5e, Cat 6, Cat 6a, etc.) cables.

Care:

  • Keep the adapter free from dust and moisture.
  • Use a dry, soft cloth for cleaning. Avoid abrasive cleaners or solvents.
  • Ensure proper ventilation around the adapter to prevent overheating.