Muc-Off C3 Ceramic All Weather Bicycle Lube - 50ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Muc-Off C3 All Weather Ceramic Chain Lube is designed for cyclists of all disciplines—from road riding to mountain biking—who demand consistent drivetrain performance across varying weather conditions. Its core benefit lies in the boron nitride infusion, which significantly reduces friction and provides a long-lasting, water-repellent barrier that extends the life of drivetrain components; however, users should note that as a performance-oriented lubricant, it requires a clean, degreased chain before the first application to ensure the ceramic coating bonds correctly.
All features
| Model Part Number | 21466 |
|---|---|
| Brand | Muc-Off |
Extended Product Information
FAQs
Do I need to clean my chain every time I re-apply?
No, you only need to perform a deep clean before the initial application. For maintenance, a simple wipe-down with a clean cloth before reapplying is sufficient.
Is this lube suitable for e-bike chains?
Yes, the C3 ceramic technology is excellent for the high-torque environment of e-bike drivetrains as it helps reduce wear on the chain and cassette.
How do I use the UV tracer feature?
Apply the lube to the chain, then use a standard UV torch in a dimly lit area. The lube will glow, allowing you to see exactly where it has been applied.
Can I use this on other parts of my bike?
Yes, it works well on cables, derailleurs, and pivot points to keep them moving smoothly and protected from corrosion.
How long should I wait before riding after application?
For best results, let the lube sit for at least 3-4 hours before riding, though overnight is ideal to allow the carrier solvents to evaporate.
Troubleshooting
Chain feels 'gummy' or attracts excessive grit.
You have likely applied too much lube. Wipe the chain thoroughly with a dry, lint-free cloth after application to remove excess.
The lube does not seem to last a long ride.
Ensure you performed a deep clean of the chain before the first application. Residual factory grease or old lube prevents the ceramic layer from bonding.
Pros and Cons
Pros
- Extremely smooth and quiet drivetrain operation
- Excellent longevity in mixed weather conditions
- Non-fling formula keeps the frame cleaner for longer
- Easy to verify coverage using the included UV tracer
- Biodegradable and environmentally conscious formula
Cons
- Requires thorough initial cleaning of the chain for best results
- Small 50ml bottle may run out quickly for high-mileage riders
- Higher price point compared to standard synthetic lubes
Setup, Compatibility & Care
To achieve the best results, start with a completely clean and dry chain. If you are switching from a different type of lube, use a quality degreaser to remove all traces of old lubricant, as contaminants can prevent the ceramic particles from bonding to the metal. Once the chain is dry, apply the C3 Lube to each link roller while rotating the chain. Allow it to set for a few minutes before wiping off any excess with a clean cloth. The C3 formula is safe to use on bicycle chains, gear cables, derailleurs, pedals, and cleats to reduce friction and prevent rust.