Innes 5 Light Semi Flush Ceiling Light - Silver
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Innes 5 Light Semi Flush Ceiling Light in Silver is designed for modern homes seeking a stylish and functional lighting solution. Its key benefit is providing widespread illumination with a sleek, contemporary aesthetic. A caveat to note is that the required E27 bulbs are not included. This semi-flush ceiling light features a polished chrome and grey finish, a compact design ideal for various room heights, and is dimmable to set the perfect ambiance.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 26589246 |
| Brand | Pagazzi Lighting |
Extended Product Information
FAQs
Are the light bulbs included with the Innes ceiling light?
No, the Innes 5 Light Semi Flush Ceiling Light does not include the E27 light bulbs. These must be purchased separately.
What type of bulbs do I need for this light?
You will need 5 x E27 (Edison Screw) light bulbs. The maximum wattage per bulb is 60W.
Can I use LED bulbs with this fixture?
Yes, you can use E27 LED bulbs as long as they do not exceed the 60W maximum equivalent and are compatible with dimming if you intend to use the dimming feature.
What are the dimensions of the light fixture?
The fixture has a height of 12cm and a diameter of 31cm.
Is this light fixture dimmable?
Yes, the Innes 5 Light Semi Flush Ceiling Light is dimmable, provided you use dimmable E27 bulbs and a compatible dimmer switch.
What is the finish of this light?
The finish is a polished chrome and grey.
Is this light suitable for bathrooms?
This light is generally intended for living areas, hallways, or bedrooms. For bathroom installations, please ensure it meets the appropriate IP rating for the specific zone you intend to install it in, which is not specified in the product description.
Troubleshooting
Light does not turn on
Check that the power supply is switched on at the mains and the light switch. Ensure bulbs are correctly installed and not burnt out. Verify that the wiring connections are secure.
Some bulbs are not working
Remove and re-insert the affected bulbs, ensuring they are properly seated in the E27 sockets. Test each bulb individually in a known working fixture to rule out a faulty bulb.
Light flickers
This could indicate a loose bulb or a problem with the dimmer switch. Ensure all bulbs are tightened. If using a dimmer, check its compatibility with the bulbs being used, especially if they are LED or CFL.
Dimming function is not working
Confirm that the installed bulbs are specifically marked as 'dimmable' and that the wall switch or dimmer control is functioning correctly and is compatible with the type of bulbs installed.
Pros and Cons
Pros
- Elegant and modern aesthetic
- Suitable for rooms with limited ceiling height
- Dimmable feature for adjustable ambiance
- Provides good light distribution with 5 bulbs
- Part of a coordinated lighting collection
Cons
- Light bulbs are not included and must be purchased separately
- Requires 5 E27 bulbs, which can add to the initial cost
- May not be suitable for very large rooms requiring extremely high light output
Setup, Compatibility & Care
Setup:
- Ensure the power supply is switched off at the mains before installation.
- Follow the manufacturer's instructions for mounting the fixture securely to the ceiling.
- Install up to 5 E27 light bulbs (maximum 60W each). Ensure bulbs are correctly seated.
- Restore power at the mains.
Compatibility:
- Bulb Type: Requires 5 x E27 (Edison Screw) light bulbs.
- Wattage: Maximum 60W per bulb.
- Dimmability: Compatible with dimmable E27 bulbs for adjustable light output. Ensure your wall switch is also compatible with dimming if required.
- Voltage: Standard household voltage (confirm with local electrical codes).
Care:
- Always turn off the power at the mains before cleaning.
- Wipe the fixture gently with a soft, dry or slightly damp cloth.
- Avoid using abrasive cleaners or harsh chemicals, as they can damage the finish.
- Ensure the fixture is completely dry before restoring power.