Warren Reed Designer Deep Green Quartz Effect Kitchen Splashback - 75 x 70cm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Warren Reed kitchen splashback is designed for homeowners looking to add a stylish and durable protective layer behind their hob or sink. Its key benefit is providing a heat-resistant, easy-to-clean surface that enhances kitchen aesthetics. A potential caveat is the need for specific adhesive for installation. The splashback is crafted from 6mm toughened glass with a high-gloss finish, featuring polished edges for safety and elegance.
All features
| Model Part Number | 75 x 70cm |
|---|---|
| Brand | Warren Reed |
Extended Product Information
FAQs
What type of adhesive should I use for installation?
You should use a clear, natural curing adhesive specifically recommended for glass splashbacks. Always follow the adhesive manufacturer's instructions.
Can this splashback be used behind any type of hob?
Yes, it is designed to be heat-resistant and suitable for use behind both gas and electric hobs.
How do I clean the splashback?
Clean the surface with a soft, damp cloth and a standard glass cleaner. Avoid abrasive materials.
What are the dimensions of this specific splashback?
This particular model measures 75cm in width and 70cm in height.
Is the glass tempered for safety?
Yes, the splashback is crafted from 6mm toughened glass, which is tempered for enhanced durability and safety.
Where is this product manufactured?
This splashback is proudly printed in the UK.
Can I cut the splashback to a custom size?
It is not recommended to cut the toughened glass yourself, as this can compromise its structural integrity and safety. It is best to choose a size that fits your requirements from the available options.
Troubleshooting
Splashback appears warped or discolored after installation.
Ensure the correct type of adhesive (clear, natural curing) was used and that it has fully cured. Incorrect adhesives or premature exposure to heat can cause issues.
Difficulty cleaning stubborn stains.
Use a non-abrasive glass cleaner or a mild detergent solution. For very tough marks, allow the cleaner to sit for a minute before wiping gently. Always rinse and dry thoroughly.
Adhesive is not holding the splashback securely.
Verify that the wall surface was clean, dry, and smooth before application. Ensure the adhesive used is suitable for glass and has been applied according to manufacturer instructions. Allow adequate curing time.
Pros and Cons
Pros
- Enhances kitchen aesthetics with a stylish quartz effect design.
- Provides excellent heat resistance for safe use behind hobs.
- Simple to maintain due to its smooth, non-porous glass surface.
- Durable 6mm toughened glass ensures longevity.
- Adds a practical barrier against splashes and stains.
Cons
- Requires specific clear, natural curing adhesive for installation.
- Glass can be heavy, potentially requiring two people for safe handling and installation.
- Sharp edges may be present if not handled with care during installation (though polished edges mitigate this).
- May show fingerprints or smudges more readily due to the high-gloss finish.
- Not suitable for textured or uneven wall surfaces without proper preparation.
Setup, Compatibility & Care
Setup:
For installation, ensure the wall surface is clean, dry, and smooth. Use only a clear, natural curing adhesive specifically designed for glass splashbacks. Apply the adhesive evenly to the wall or the back of the splashback as per adhesive instructions. Carefully position the splashback and press firmly to ensure full contact. Allow the adhesive to cure completely before any cleaning or heavy use.
Compatibility:
This splashback is designed for installation on most standard kitchen walls. It is compatible with both gas and electric hobs. Ensure the dimensions of the splashback are suitable for your specific installation area. It is not recommended for direct mounting onto uneven or porous surfaces without appropriate wall preparation.
Care:
Clean the surface regularly using a soft, damp cloth and a standard glass cleaner. Avoid abrasive cleaners or scouring pads, as these can scratch the glass surface. For stubborn marks, a mild detergent can be used, followed by a clean water rinse and a thorough dry with a lint-free cloth.