CellPack CSV-T Screw Connector - 267708
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Cellpack 267708 CSV-T Screw Connector is designed for electricians and technicians working with medium-sized electrical infrastructure, enabling secure and reliable connections for both copper and aluminum conductors. Its primary benefit is the versatile compatibility with a broad range of cable cross-sections (50-150mm²) and conductor types, ensuring a robust connection. A minor caveat is that it requires a specific counter holder for installation, which is sold separately. This connector is ideal for straight connections and transitions, offering a tinned surface finish for enhanced conductivity and protection.
All features
| Model Part Number | 267708 |
|---|---|
| Brand | CellPack |
Extended Product Information
FAQs
What types of conductors can be used with the Cellpack 267708?
This connector is compatible with both copper and aluminum conductors, including solid (RE) and stranded (RM, SM) types.
What is the maximum and minimum cable cross-section this connector supports?
The connector is designed for cables with a nominal cross-section ranging from 50mm² to 150mm².
Does this connector require any special tools for installation?
While standard tools are needed to tighten the screws, Cellpack recommends using their specific counter holder for optimal installation.
What does the 'tinned' surface finish mean for performance?
The tinned surface finish provides enhanced conductivity and helps prevent corrosion, ensuring a more stable and long-lasting electrical connection.
Can this connector be used for outdoor or wet environments?
The product has an IP rating classified as 'other.' Specific environmental suitability should be confirmed based on the detailed specifications of the IP rating and the intended installation conditions.
Is this connector suitable for joining cables of different materials (e.g., copper to aluminum)?
Yes, the connector is designed to handle both copper and aluminum conductors, making it suitable for transition connections.
What is the purpose of the 'oil stop/center bar'?
The oil stop/center bar helps ensure proper cable preparation and secures the internal connection, contributing to the overall reliability and integrity of the joint.
Troubleshooting
Connector does not hold cable securely
Ensure the cable's conductor size is within the 50-150mm² range. Verify that the screws are tightened evenly and sufficiently. Check if the conductor surface is clean and free from excessive oxidation.
Difficulty inserting conductors
Confirm that the conductors are properly prepared (ends are clean, round, and free of burrs). Ensure no foreign material is inside the connector entry point. If using stranded conductors, ensure all strands are contained within the terminal.
Connection feels loose after tightening screws
Re-evaluate the conductor size. If the conductor is at the lower end of the 50-150mm² range, it may not fill the connector cavity sufficiently. Ensure the correct screw torque is applied without stripping the threads.
Pros and Cons
Pros
- Wide compatibility with both copper and aluminum conductors.
- Accommodates a substantial range of cable sizes (50-150mm²).
- Durable construction with a tinned surface for corrosion resistance.
- Designed for secure and reliable electrical connections.
Cons
- Requires a specific counter holder for installation (sold separately).
- Classified as 'other' for IP rating, specific environmental protection details may need further verification.
- Primarily for straight connections; not designed for complex angled joints.
Setup, Compatibility & Care
Setup: The Cellpack CSV-T screw connector is designed for use with cables within the 50-150mm² nominal cross-section range. Ensure conductors are stripped to the appropriate length according to cable manufacturer guidelines. Insert the conductors into the connector and tighten the two screws firmly and evenly to secure the connection. For installation, the Cellpack counter holder is recommended.
Compatibility: This connector is compatible with both solid and stranded copper and aluminum conductors (types RE, RM, SM). It is intended for straight connection and transition applications. Ensure the cable insulation is suitable for the operating environment.
Care: This connector is designed for permanent installation and requires no routine maintenance under normal operating conditions. Keep the connector area clean and free from debris. If access is possible, periodically check screw tightness (ensure power is disconnected before any inspection). Avoid exposure to excessive moisture or corrosive substances unless the 'other' IP rating designation is confirmed to be sufficient for the environment.