Vax Upright Carpet Cleaner - SpinScrub Power, XL Capacity


Currently unavailable


Currently unavailable
This Vax Upright Carpet Cleaner is designed for homeowners looking for a powerful solution to deep clean carpets and tackle tough stains. Its key benefit is the SpinScrub Technology combined with XL capacity and HEATBLAST, enabling effective cleaning and faster drying times. A potential caveat is its size for smaller storage spaces. This model features 1200W power, 5 rotating brushes, extra-large tanks, and a wide cleaning path for efficient home cleaning, plus above-floor cleaning capabilities.
| Model Part Number | CDCW-SSXD |
|---|---|
| Brand | Vax |
For optimal results and to maintain your warranty, it is recommended to use Vax's approved carpet cleaning solutions, such as the Platinum Antibacterial Solution included with this model.
This cleaner is designed for most synthetic fiber carpets. It is always recommended to test on a small, inconspicuous area first before cleaning the entire carpet, especially for natural fibers or delicate materials.
It is recommended to clean the brush bar after each use to remove any hair, lint, or debris. This ensures optimal performance and prevents potential tangling or damage.
HEATBLAST Technology uses a combination of hot air and powerful extraction to significantly reduce carpet drying times, often allowing carpets to be dry in as little as one hour.
Attach the upholstery tool to the hose. Fill the machine with clean water and solution, then use the tool to spray and extract water from upholstery, stairs, or other fabric surfaces.
The machine features XL capacity tanks, designed to hold a larger volume of water and dirt, allowing for longer cleaning sessions before needing to be refilled or emptied.
When used as directed and with adequate ventilation, Vax Platinum Antibacterial Solution is designed to be safe for use in homes with pets and children once carpets have dried. Always refer to the specific solution's safety instructions.
Ensure the power cord is securely plugged into a working outlet. Check that the machine is assembled correctly and all tanks are properly seated.
Check if the dirty water tank is full and needs emptying. Inspect the nozzle and brush bar for any blockages or tangled debris. Ensure the cleaning solution and water mixture is correct.
Verify that the clean water tank is filled and correctly positioned. Check for any blockages in the dispensing nozzle.
Ensure both clean and dirty water tanks are correctly installed and sealed. Check seals and gaskets for damage. Do not overfill the clean water tank.
Ensure the dirty water tank is empty and the suction is working effectively. Avoid over-wetting the carpet by making extra 'dry' passes (suction only). Check that HEATBLAST is functioning as expected.
Setup:
Compatibility:
Care: