WAGO 770-315 5-Pole Connector - With Strain Relief
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The WAGO 770-315 is a 5-pole, straight, male pin header electrical connector designed for secure and efficient building installations. It offers a key benefit of integrated strain relief for robust cable management, ideal for electricians and DIY enthusiasts. A potential consideration is its IP20 protection rating, meaning it is not suitable for wet or outdoor environments without additional protection. Key features include 400V/25A operation, spring clamp terminals, and compatibility with wires from 0.5-4mm².
All features
| Model Part Number | 770-315 |
|---|---|
| Brand | WAGO |
Extended Product Information
FAQs
What is the primary advantage of the integrated strain relief?
The integrated strain relief securely grips the cable sheath, preventing mechanical stress on the electrical connections. This enhances reliability and reduces the risk of disconnection due to vibration or movement.
Can I use this connector outdoors?
No, the WAGO 770-315 has an IP20 protection rating, which means it is suitable for dry, indoor environments only. It does not offer protection against moisture or dust ingress.
What tools are needed for installation?
The spring clamp terminals are designed for tool-free wire termination. You will need a wire stripper to prepare the conductors to the correct length.
What is the maximum number of wires this connector can handle?
This is a 5-pole connector, meaning it can accommodate up to five individual conductors.
What wire sizes are compatible with the spring clamps?
The spring clamp terminals are compatible with solid and stranded conductors ranging from 0.5mm² to 4mm².
What is the voltage and current rating?
The connector is rated for a maximum of 400V and 25A.
How do I ensure a secure connection?
Ensure the stripped wire is fully inserted into the terminal until it stops. You should feel a slight resistance as it seats properly. The strain relief clamp should also be securely closed around the cable.
Troubleshooting
Connector not making a connection
Ensure the wire is fully inserted into the spring clamp terminal and that the insulation is stripped to the correct length. Check that the conductor is solid and within the supported cross-section range.
Strain relief not holding cable securely
Verify that the cable's outer diameter is within the 9-13mm range. Ensure the strain relief clamp is fully closed and properly engaged with the cable sheath.
Overheating during operation
Confirm that the connected wires are within the 0.5-4mm² range and that the current draw does not exceed the 25A rating. Check for loose connections or damaged conductors.
Difficulty inserting wires
Ensure the wire is stripped cleanly and that no stray strands are present. If using stranded wire, ensure it is not excessively frayed. Do not force the wire; it should slide in with moderate pressure.
Pros and Cons
Pros
- Tool-free wire termination with spring clamps saves time and effort.
- Integrated strain relief enhances connection security and longevity.
- Compact dimensions facilitate installation in tight spaces.
- High current and voltage rating supports various applications.
- 5-pole configuration offers flexibility in circuit design.
Cons
- IP20 rating limits use to dry, indoor environments.
- Designed for cable mounting; not suitable for panel-mount applications without appropriate adapters.
- Requires specific cable diameters (9-13mm) for optimal strain relief.
Setup, Compatibility & Care
Setup:
- Prepare your wires by stripping approximately 9-11mm of insulation.
- Open the strain relief clamp.
- Insert the stripped conductor into the spring clamp terminal until it is fully seated.
- Close the strain relief clamp to secure the cable.
- Repeat for all 5 poles, ensuring correct wire placement.
Compatibility:
- Wire Cross-section: Supports solid and stranded conductors from 0.5mm² to 4mm².
- Cable Diameter: Compatible with cables having an outer diameter of 9mm to 13mm.
- Voltage/Current: Rated for 400V and 25A.
Care:
- Ensure the connector is disconnected from power before any maintenance.
- Clean the exterior with a dry or slightly damp cloth. Avoid abrasive cleaners or solvents.
- Periodically inspect connections for any signs of damage or contamination, especially in environments prone to dust.
- Ensure the strain relief remains functional and properly secured.