Super Lube Multi-Purpose Synthetic Grease - 12 g
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Super Lube Multi-Purpose Synthetic Grease with Syncolon (PTFE) is a premium, NLGI Grade 2 lubricant designed for individuals and professionals seeking superior protection for precision machinery like 3D printers. Its synthetic, dielectric, and food-grade formula excels at reducing friction and preventing rust and corrosion across a wide temperature range, though users should note that it is specifically recommended for threaded rods rather than non-threaded components.
All features
| Model Part Number | 21013 |
|---|---|
| Brand | Super Lube |
Extended Product Information
FAQs
Can I use this on non-threaded rods?
No, it is recommended to use an oil-based lubricant for non-threaded rods to ensure proper movement.
Is this grease safe for food processing machinery?
Yes, it is a food-grade lubricant.
Will this grease melt inside a hot 3D printer enclosure?
No, it is rated for temperatures up to 232°C, making it safe for typical 3D printing environments.
How often should I re-apply the grease?
Re-apply based on your printer usage, typically every few months or when you notice increased noise on the Z-axis.
Is this compatible with all 3D printer brands?
Yes, it is a universal lubricant compatible with all printer manufacturers.
Troubleshooting
Grease is attracting dust and debris
You may have applied too much; wipe away excess grease and ensure the rod is clean before reapplying a thinner layer.
Noisy or grinding sounds from threaded rods
Clean the rod thoroughly to remove old buildup and apply fresh Super Lube to ensure adequate coating.
Pros and Cons
Pros
- Resistant to rust and corrosion
- Does not form gummy deposits
- Wide operating temperature range
- Safe and environmentally friendly formula
Cons
- Small 12g tube size
- Not suitable for non-threaded rods (oil is recommended instead)
- Requires manual application
Setup, Compatibility & Care
For best results, clean your printer's threaded rods thoroughly to remove old, dirty lubricant before applying a fresh layer of Super Lube. Use a lint-free cloth or a dedicated cleaning agent to ensure the rod is free of debris. Apply a small amount of grease to the threads, then move the axis up and down several times to distribute the lubricant evenly along the entire screw. While this product is highly durable, performing this maintenance routine every few months will extend the lifespan of your mechanical components.