WAGO 5 Pole Female Socket With Strain Relief - 770-105
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The WAGO 770-105 is a professional-grade, 5-pole female socket connector designed for secure and flexible electrical installations in industrial and commercial settings. It offers reliable, maintenance-free connections for up to 4.00 mm² cables, simplifying building installations with its push-in CAGE CLAMP® technology. While it provides excellent diversity and coding options for preventing mismating, users should be aware of its specific operating temperature range.
All features
| Model Part Number | 770-105 |
|---|---|
| Brand | WAGO |
Extended Product Information
FAQs
What is the maximum cable size this connector can handle?
The WAGO 770-105 can accommodate cable sections up to 4.00 mm².
Is this connector suitable for outdoor use?
No, the 770-105 has an IP20 protection rating, making it suitable only for dry indoor environments. It is not protected against water or dust ingress.
Do I need special tools to install the wires?
No, the Push-in CAGE CLAMP® technology allows for tool-free termination of solid and ferruled conductors.
What does '100% protected against mismating' mean?
This feature ensures that the connector can only be plugged into its correctly corresponding counterpart, preventing electrical faults caused by incorrect connections.
What is the operating temperature range for this connector?
The processing temperature range is -5°C to 40°C, and the continuous operating temperature range is -35°C to +85°C.
How do I ensure the cable is securely held by the strain relief?
Ensure your cable's outer diameter falls within the 9-13 mm range specified for the strain relief and tighten the strain relief mechanism appropriately around the cable jacket.
What voltage and current can this connector handle?
The WAGO 770-105 has a rated voltage of 400 V and a current rating of 25 A.
Troubleshooting
Connector does not make a secure connection
Ensure the conductor is stripped to the correct length and fully inserted into the Push-in CAGE CLAMP®. Verify the conductor type (solid or ferruled) and size are within the specified range (up to 4.00 mm²).
Mismatched connection
Confirm that both the plug and socket connectors have the same coding specification (e.g., Coding A). The 100% protection against mismating is designed to prevent incorrect pairings.
Strain relief not holding cable firmly
Ensure the cable diameter is within the specified range for the strain relief (9 - 13 mm). Adjust the strain relief mechanism if applicable and ensure it is properly tightened around the cable jacket.
Intermittent electrical contact
Check for any signs of damage to the conductors or the internal connection points. Re-terminate the conductor, ensuring a clean and solid connection. If the issue persists, consider replacing the connector.
Pros and Cons
Pros
- Maintenance-free connections with Push-in CAGE CLAMP® technology.
- High degree of flexibility due to the WINSTA MIDI system's diversity and coding options.
- Secure and reliable connections with integrated strain relief and 100% protection against mismating.
- Suitable for a wide range of solid and ferruled conductors up to 4.00 mm².
- Fast and efficient installation process.
Cons
- Limited to 400 V rated voltage, not suitable for higher voltage applications.
- IP20 protection rating means it is not suitable for wet or dusty environments.
- Processing temperature range (-5 to 40°C) needs to be considered during installation.
- Requires specific WAGO connectors for complete plug-and-socket pairing.
Setup, Compatibility & Care
Setup:
- Prepare conductors: Strip solid conductors or insert ferruled conductors directly into the Push-in CAGE CLAMP® connection points.
- Insert conductors: Push the conductor firmly into the appropriate entry port until it is securely seated.
- Connect to mating part: Connect the female socket to its corresponding WAGO WINSTA plug.
- Secure connections: Ensure locking levers are engaged for a secure connection, especially for flying leads.
Compatibility:
- Compatible with WAGO WINSTA MIDI series plugs and connectors.
- Designed for cable diameters between 9 - 13 mm for the strain relief.
- Suitable for solid conductors and ferruled conductors up to 4.00 mm².
- Coding A ensures compatibility with corresponding Coding A plugs.
Care:
- The WAGO 770-105 is a maintenance-free component under normal operating conditions.
- Regularly inspect connections for physical damage.
- Clean the exterior of the connector with a dry or slightly damp cloth if necessary. Avoid abrasive cleaners or solvents.
- Ensure the IP20 protection is not compromised by dust or moisture ingress.