G.Skill Ripjaws-X Memory - 16 GB: 2 x 8 GB - DDR3
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This G.Skill Ripjaws-X 16GB DDR3-2400 memory kit is designed for PC builders and enthusiasts seeking a reliable performance boost for their systems. Its key benefit is enhanced speed and multitasking capability for demanding applications and games. A potential caveat is its DDR3 technology, which means it is only compatible with older motherboards that support this RAM type. This kit includes two 8GB modules for a total of 16GB, featuring DDR3 technology, a speed of 2400 MHz, and a CAS latency of 11.
All features
| Series | Ripjaws-X |
|---|---|
| Model Part Number | F3-2400C11D-16GXM |
| Brand | G.Skill |
Extended Product Information
FAQs
Is this RAM compatible with my motherboard?
This is DDR3 memory with a 240-pin DIMM form factor. You must check your motherboard's specifications to ensure it supports DDR3 RAM and has 240-pin slots. Older motherboards generally support DDR3, but compatibility with 2400 MHz speed should also be verified.
How do I install the RAM modules?
Power off your PC, open the case, align the notch on the RAM module with the slot, and press down firmly until it clicks. Refer to the 'Setup' section for detailed steps.
What does CL11 mean?
CL stands for CAS Latency. CL11 is a timing measurement indicating the delay before the RAM module responds to a request for data. Lower numbers are generally faster.
Can I mix these modules with other DDR3 RAM?
While it's possible, mixing RAM modules from different brands, speeds, or timings can lead to instability. For best performance and stability, it's recommended to use identical modules or modules with very similar specifications.
Do I need to enable XMP?
Enabling XMP (Extreme Memory Profile) in your BIOS is recommended if your motherboard supports it. This allows the RAM to run at its advertised speed (2400 MHz) and timings automatically. Otherwise, you may need to set these parameters manually.
What is the voltage requirement for this RAM?
This memory module supports voltages of 1.5V and 1.65V. Typically, 1.65V is used to achieve the rated 2400 MHz speed, especially when using XMP profiles. Ensure your motherboard can supply the correct voltage.
What is the purpose of the heatsink?
The heatsink is designed to dissipate heat generated by the memory modules during operation. This helps maintain stable performance and can prevent overheating, especially during demanding tasks or overclocking.
Troubleshooting
Computer does not boot or POSTs with new RAM
Ensure RAM modules are fully seated in their slots. Try installing one module at a time to identify a potentially faulty stick. Verify motherboard compatibility with DDR3 2400MHz RAM and check BIOS settings for correct configuration.
System instability or random crashes
Confirm RAM is correctly seated. Check if the RAM voltage settings in BIOS match the module's requirements (1.5V or 1.65V). Ensure the motherboard's memory controller can handle the speed; consider slightly reducing the speed in BIOS if instability persists.
RAM not running at advertised speed (e.g., 2400 MHz)
Enter the BIOS/UEFI and enable the XMP (Extreme Memory Profile) if available. Manually set the memory frequency, timings (CL11-13-13-31), and voltage (1.65V) according to the module's specifications.
One RAM module is not detected
Test each module individually in different slots to rule out slot issues or a faulty module. Ensure the module is fully inserted and secured.
Pros and Cons
Pros
- Significant performance upgrade for compatible systems
- Effective heatsink design for thermal management
- Intel XMP support simplifies performance tuning
- High clock speed of 2400 MHz
- Reputable brand known for quality components
Cons
- DDR3 technology limits compatibility to older motherboards
- May not be compatible with the latest CPU and motherboard generations
- Requires manual installation and BIOS configuration for optimal performance
- Voltage requirements (1.5V, 1.65V) need to be matched with motherboard specifications
Setup, Compatibility & Care
Compatibility: This memory module uses DDR3 technology and a 240-pin DIMM form factor. It is crucial to verify that your motherboard explicitly supports DDR3 RAM and has 240-pin DIMM slots. Check your motherboard's manual or manufacturer's website for a definitive compatibility list. This kit is designed for PC/Server components.
Setup:
- Power off your computer and unplug the power cord.
- Open the computer case.
- Locate the RAM slots on the motherboard.
- Gently open the clips on the sides of the RAM slot.
- Align the notch on the memory module with the notch in the RAM slot. Do not force it.
- Press down firmly and evenly on both ends of the memory module until it clicks into place and the clips secure it.
- Close the computer case and reconnect the power cord.
- Boot your computer. You may need to enter the BIOS/UEFI to ensure the memory is recognized at its rated speed, potentially enabling XMP profiles if supported.
Care: To ensure longevity and optimal performance, avoid exposing the memory modules to excessive dust, moisture, or extreme temperatures. Handle modules by their edges to prevent damage to the contacts. Ensure adequate airflow within the PC case to help the heatsinks dissipate heat effectively.