Hydraulic Bearing Puller and Separator Tool - 25 pcs
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 25-piece hydraulic bearing puller and separator tool set is designed for professionals in railway vehicle maintenance, mechanical installation, mines, and factories, enabling efficient removal of pulleys, bearings, and gears. Its primary benefit is the powerful 10-tonne hydraulic ram for heavy-duty tasks, though users should ensure compatibility with bearing sizes ranging from Ø 75 - 105 mm. The set includes a comprehensive array of puller legs, adapters, and a hydraulic ram, all organized in a durable blow-moulded case.
All features
| Model Part Number | 25 |
|---|---|
| Brand | VidaXL |
Extended Product Information
FAQs
What is the maximum capacity of the hydraulic ram?
The hydraulic ram has a capacity of 10 tonnes.
What is the size range for bearings that the separator can handle?
The included bearing separator is suitable for bearings with a diameter ranging from Ø 75 mm to 105 mm.
How many pieces are included in this tool set?
The set includes a total of 25 pieces, encompassing various puller legs, adapters, extension rods, and the hydraulic ram.
Can this tool be used for home garage applications?
While it can be used for home garage tasks, its primary design and power are suited for heavy-duty professional applications in industrial or commercial settings.
What type of maintenance is this tool best suited for?
It is ideal for railway vehicle maintenance, mechanical installations, and maintenance in mines and factories, specifically for removing pulleys, bearings, and gears.
How should I store the tool set?
All components should be stored in the provided blow-moulded case to keep them organized, protected, and easily portable.
Do I need any special tools to operate the hydraulic ram?
The hydraulic ram is operated by a manual pumping handle, so no additional power tools are required for its operation.
Troubleshooting
Hydraulic ram not applying pressure
Check the hydraulic fluid level. Ensure the release valve is fully closed. Bleed the system if air is suspected. Inspect seals for damage.
Legs slipping off the component
Ensure the legs are properly seated and gripping the edge of the pulley or bearing. Use the correct leg length and configuration for the component size. Consider using a cross-beam brace if available for added stability.
Difficulty removing seized component
Apply penetrating oil to the affected area and allow it to soak. Increase hydraulic pressure gradually. Ensure the pulling force is applied evenly. Check if the component is within the specified size range for the bearing separator.
Case latch broken
Contact the manufacturer or retailer for replacement parts. Reinforce with strong tape for temporary transport if necessary.
Pros and Cons
Pros
- Powerful 10-tonne hydraulic ram for efficient component removal.
- Extensive 25-piece kit covers a wide range of pulling and separating needs.
- Includes a dedicated bearing separator for specific automotive and industrial applications.
- Comes in a sturdy, organized blow-moulded case for storage and transport.
- Suitable for heavy-duty professional use in industrial settings.
Cons
- Limited to specific bearing sizes (Ø 75 - 105 mm) for the included separator.
- Requires adequate space for operation due to the size of the hydraulic ram and components.
- May be overkill for light-duty or occasional home garage use.
- The complexity of the set may require a learning curve for new users.
- Hydraulic fluid maintenance might be necessary over time.
Setup, Compatibility & Care
Setup: Assemble the desired configuration by selecting the appropriate legs, beam, and adapters for the component to be removed. Attach the selected components to the bearing separator or directly to the component if needed. Connect the 10-tonne hydraulic ram to the pulling assembly, ensuring secure connections. Position the tool onto the bearing or pulley, ensuring the legs are firmly gripping the edge. Operate the hydraulic ram by pumping the handle to apply pressure gradually and evenly.
Compatibility: This tool set is designed for removing pulleys, bearings, and gears. The bearing separator component is specifically designed for commercial vehicle size bearings with a diameter ranging from Ø 75 mm to 105 mm. Ensure the components to be removed are within this size range for optimal use of the separator. The hydraulic ram and various leg lengths offer adaptability for different shaft sizes and component depths.
Care: After each use, clean the tool components with a dry cloth to remove dirt and grease. Inspect the hydraulic ram for any leaks and ensure the hydraulic fluid level is adequate (refer to ram specifications if needed). Store all parts back in the blow-moulded case to prevent damage and loss. Periodically check screws and connections for wear and tear, replacing if necessary. Keep the tool in a dry environment to prevent rust.