Connect Fuel Line Quick Connectors - 3pc
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 3-piece set of Connect Fuel Line Quick Connectors is designed for automotive applications, offering a convenient 90° angle for tight spaces and compatibility with standard fuel lines. Its key benefit is enabling secure, leak-free connections for 10mm ID Nylon Pipe and 12mm ID Rubber Hose. A potential caveat is the 5 Bar maximum working pressure, which users should verify against their system requirements.
All features
| Model Part Number | 37210 |
|---|---|
| Brand | Connect |
Extended Product Information
FAQs
What type of fuel lines are compatible with these connectors?
These connectors are designed for 10mm ID Nylon Pipe and 12mm ID Rubber Hose.
What is the maximum pressure these connectors can handle?
The maximum working pressure for these connectors is 5 Bar.
What material are the seals made of?
The seals are made of Viton, known for its excellent resistance to fuels and chemicals.
Can these connectors be used with diesel or gasoline?
Yes, they are suitable for standard automotive fuel types, including gasoline and diesel.
How do I ensure a secure connection?
Push the hose firmly onto the barbed end until it is fully seated. A secure connection is crucial to prevent leaks.
What does the grey tab indicate?
The grey tab is used for fuel identification, helping to distinguish different fuel lines within a system.
How many connectors are included in a pack?
Each pack contains 3 pieces of the fuel line quick connectors.
Troubleshooting
Connector does not grip the hose firmly.
Ensure the correct hose ID (10mm Nylon or 12mm Rubber) is being used. Verify the hose is pushed on completely until fully seated. Check the hose for any damage or deformation that may prevent a secure fit. The hose may need to be slightly warmed to ease installation.
Suspected fuel leak at the connection point.
Disconnect and reconnect the hose, ensuring it is fully seated. Inspect the Viton seals for any damage or debris. Verify the hose material is compatible with the connector and fuel type. Confirm the system pressure does not exceed the connector's 5 Bar limit.
Difficulty pushing hose onto the connector.
Slightly warm the end of the rubber hose with warm water (not hot) to make it more pliable. Ensure the connector's barb is clear of obstructions. Use a gentle twisting motion while pushing.
Pros and Cons
Pros
- 90° angle is ideal for tight engine bay routing.
- Durable Nylon PA12 construction offers good chemical resistance.
- Viton seals provide reliable leak prevention.
- Includes a helpful fuel identification tab.
- Compatible with common nylon and rubber fuel lines.
Cons
- Maximum working pressure of 5 Bar may limit use in high-pressure systems.
- Primarily suited for automotive fuel lines; not intended for all fluid types.
- Requires specific hose inner diameters (10mm Nylon, 12mm Rubber).
Setup, Compatibility & Care
Setup: Ensure the ends of the 10mm ID Nylon Pipe or 12mm ID Rubber Hose are clean and free of debris. Firmly push the hose onto the appropriate barbed end of the connector until it is fully seated. A secure click may be felt or heard when properly engaged. Compatibility: This connector is designed for fuel lines with a 10mm internal diameter (ID) for Nylon Pipe and a 12mm internal diameter (ID) for Rubber Hose. It is rated for a maximum working pressure of 5 Bar and is suitable for standard automotive fuel types. Care: Periodically inspect connectors for signs of wear, cracking, or damage. Clean the exterior with a damp cloth if necessary; avoid using harsh solvents that could degrade the Nylon PA12 material. Ensure connections remain secure and free from leaks.