Shopping.co.uk

SOUNDCORE Rave 3S - Black

Not AvailableSOUNDCORE Rave 3S - Black

Bring the party to life with the Soundcore Rave 3S, the kind of speaker that instantly turns any g...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Soundcore Rave 3S is designed for anyone looking to elevate their gatherings into lively parties. Its 200W output and enhanced bass ensure a powerful audio experience that fills any space, complemented by a dynamic, beat-synced light show. While it offers impressive features like dual wireless microphones and AI vocal removal for karaoke, users should be aware that the built-in battery life, while substantial at 12 hours, might require recharging for very extended events.

All features

ColourBlack
SeriesRave 3S
Model Part NumberA31A3012
BrandSoundcore

Extended Product Information

FAQs

How long does the battery last on a full charge?

The Soundcore Rave 3S provides up to 12 hours of playtime on a single full charge, depending on volume and usage.

Can I connect non-Soundcore speakers using Auracast™?

Auracast™ technology is designed to work with other Auracast™-enabled devices. Compatibility may vary, but it is primarily intended for use with other Soundcore speakers that support this feature.

Does the speaker have a 3.5mm AUX input?

No, the Soundcore Rave 3S does not feature a 3.5mm AUX input. Connectivity is primarily via Bluetooth or the 6.5mm combo port.

How do I use the AI Vocal Removal feature?

The AI Vocal Removal feature is accessible through the Soundcore app. Select a song, and the app will process it to remove or reduce the main vocals, preparing it for karaoke.

Is the speaker truly waterproof?

The Rave 3S has an IPX4 rating, which means it is water-resistant and protected against splashes and spills from any direction. It is not designed to be submerged in water.

Can I use a wired microphone with the speaker?

Yes, the 6.5mm combo port can accept a wired microphone. Ensure you use a compatible cable.

What is the range of the wireless microphones?

The wireless microphones typically operate within a range of approximately 30 feet (10 meters) from the speaker. Performance may vary based on environmental conditions.

Troubleshooting

Speaker not powering on

Ensure the speaker is adequately charged. Connect the charging cable and allow it to charge for at least 30 minutes before attempting to power on again.

Bluetooth connection issues

Turn off Bluetooth on your source device and the speaker, then turn them back on. Forget the "Soundcore Rave 3S" device in your Bluetooth settings and re-pair. Ensure the speaker is within range (approx. 30 feet / 10 meters).

Microphones not working

Check that the microphones are powered on and have sufficient battery. Re-pair the microphones by following the instructions in the product manual. Ensure they are within range of the speaker.

No sound or distorted sound

Check the volume levels on both the speaker and your connected device. Lower the volume on your source device and increase the speaker volume gradually. If distortion occurs at lower volumes, the audio source may be at fault.

Light show not syncing with music

Ensure the correct lighting mode is selected via the Soundcore app. Restart both the speaker and your connected device. Check for app updates.

Pros and Cons

Pros

  • Delivers powerful 200W sound suitable for large gatherings.
  • Integrated karaoke features with dual wireless mics and AI vocal removal.
  • Long battery life of up to 12 hours for extended use.
  • Water-resistant design (IPX4) for worry-free outdoor use.
  • Customizable lighting and sound effects via the Soundcore app.
  • Ability to connect numerous speakers with Auracast™ technology.

Cons

  • May require charging for events exceeding 12 hours.
  • No 3.5mm AUX input for wired device connections.
  • Wi-Fi connectivity is not supported.
  • While portable, its size and weight might be a consideration for some.

Setup, Compatibility & Care

Setup:

  1. Power On: Press the power button to turn on the speaker. The LEDs will illuminate.
  2. Bluetooth Pairing: Activate Bluetooth on your source device (smartphone, tablet). Select "Soundcore Rave 3S" from the available devices in your Bluetooth settings.
  3. Microphone Connection: The included wireless microphones should automatically pair when powered on. If not, follow the pairing instructions in the manual.
  4. App Connection: Download the Soundcore app and follow the in-app instructions to connect the speaker for advanced customization.

Compatibility:

  • Bluetooth Devices: Compatible with most smartphones, tablets, and laptops supporting Bluetooth audio streaming.
  • Wired Input: A 6.5mm combo port is available for optional wired microphones or instruments (adapter may be required).
  • Auracast™: Connects with other Soundcore speakers that support Auracast™.

Care:

  • Cleaning: Wipe the exterior with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or submerging the speaker in water.
  • Charging: Use the provided charging cable to recharge the built-in battery. Ensure the charging port is dry before connecting.
  • Storage: Store in a cool, dry place away from direct sunlight when not in use.