Cable Mount Cee Plug - 63A - 400V - 3P+N+E - Red - IP67
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This PCE Cable Mount Cee Plug is designed for professionals needing a robust and reliable electrical connection for heavy-duty applications. Its primary benefit is a secure, IP67-rated connection capable of handling 63A and 400V, suitable for harsh environments. A potential caveat is its specific pin configuration (3P+N+E) which requires matching receptacles.
All features
| Brand | PCE |
|---|
Extended Product Information
FAQs
What does IP67 rating mean?
An IP67 rating signifies that the product is dust-tight (fully protected against dust ingress) and can withstand temporary immersion in water up to 1 meter for 30 minutes without harmful effects.
Can this plug be used for single-phase power?
No, this plug is specifically designed for a 3P+N+E (three-phase, neutral, and earth) configuration and is not suitable for standard single-phase applications.
What is the purpose of the pilot contact?
The pilot contact is typically used for signaling or safety interlocks. It can be wired to confirm power availability or to ensure a connected device is in a safe state before main power is applied or removed.
What cable size can this plug accommodate?
This plug is designed for wiring cables with a diameter suitable for 6.0 - 16.0mm² cross-sectional area, and the twist cable gland helps secure this range.
How do I ensure a watertight connection?
Properly strip the cable, feed it through the twist cable gland, and tighten the gland securely around the cable sheath. Ensure all housing components are correctly assembled to maintain the IP67 seal.
Is this plug suitable for outdoor use?
Yes, the IP67 rating makes it highly suitable for outdoor use as it offers protection against dust and water.
Troubleshooting
Plug does not provide power
Ensure the plug is correctly and fully seated in a compatible, powered receptacle. Check the circuit breaker for the power source. Verify all internal wire connections are secure and correctly placed according to the 3P+N+E configuration. Test the receptacle independently.
Water or dust ingress detected
Inspect the cable gland for tightness and ensure the cable sheath is properly seated. Check the housing seals for damage or wear. If compromised, the plug may need replacement to maintain IP67 rating.
Loose connection or intermittent power
Check that the screws on the terminal connections are fully tightened. Ensure the cable is properly secured by the cable gland. Inspect the nickel-plated contacts for any debris or damage.
Pros and Cons
Pros
- High durability and protection with IP67 rating
- Suitable for high power applications (63A, 400V)
- Secure cable termination with twist gland
- Reliable electrical contact with nickel plating
- Clear identification via red color
Cons
- Specific 3P+N+E pin configuration may limit compatibility
- Requires compatible receptacle for full functionality
- Not suitable for low-power or single-phase applications
Setup, Compatibility & Care
Setup: To set up the cable mount Cee plug, first strip the cable insulation to the appropriate length as indicated by the internal markings. Feed the cable through the twist cable gland. Connect the individual conductors (Phase 1, Phase 2, Phase 3, Neutral, and Earth) to their corresponding terminals, ensuring secure connections. Pay attention to the pilot contact terminal if it is being utilized. Tighten the twist cable gland firmly around the cable sheath to ensure a watertight and strain-relieved seal. Ensure the plug housing is correctly assembled to maintain its IP67 rating.
Compatibility: This plug is designed for use with compatible Cee sockets and receptacles that feature the 3P+N+E pin configuration and are rated for 63A and 400V. Always verify that the mating connector is also IP67 rated if maintaining environmental protection is critical.
Care: Regularly inspect the plug for any signs of damage to the housing or contacts. Clean the contacts with a suitable electrical contact cleaner and a lint-free cloth if necessary, ensuring the plug is disconnected from power. Keep the cable gland area clean to maintain its sealing integrity. Avoid exposing the plug to chemicals or solvents that could degrade the plastic housing or rubber seals.